User manual PANASONIC KX-TG5240

[. . . ] TG5240. fm Page 1 Wednesday, September 22, 2004 3:45 PM 5. 8 GHz Expandable Cordless Phone System Operating Instructions Model No. KX-TG5240 KX-TG5243 Pulse-or-tone dialing capability Model shown is KX-TG5240. The unit is Caller ID compatible. To display the caller's name and phone number, you must subscribe to Caller ID service. PLEASE READ BEFORE USE AND SAVE. Charge the battery for 6 hours before initial use. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico TG5240. fm Page 2 Wednesday, September 22, 2004 3:45 PM Thank you for purchasing your new Panasonic cordless telephone. Please read the IMPORTANT SAFETY INSTRUCTIONS on page 94 before use. [. . . ] 28), or storing numbers in the phone book (p. Line access number [9] (PBX) [9] N Soft key ( PAUSE ) or [REDIAL/PAUSE] N Phone number · Pressing the soft key ( PAUSE ) on the handset or [REDIAL/PAUSE] on the base unit once creates a 3. 5 second pause. This prevents misdialing when you dial after confirming the entered number (p. · Pressing the soft key ( PAUSE ) on the handset or [REDIAL/PAUSE] on the base unit more than once increases the length of the pause between numbers. 56 TG5240. fm Page 57 Wednesday, September 22, 2004 3:45 PM Special Features Temporary Tone Dialing (For Rotary or Pulse Service Users) Handset Base Unit Preparation Press [*] (TONE) before entering access numbers which require tone dialing. · The dialing mode changes to tone. You can enter numbers to access an answering service, electronic banking service, etc. When you hang up, the dialing mode will return to pulse. For Call Waiting Service Users Handset Base Unit Press [FLASH/CALL WAIT] if you hear a call waiting tone during a conversation. · The first call is put on hold and you can answer the second call. · To return to the first caller, press [FLASH/CALL WAIT] again. · Call Waiting service cannot be used when the first call is put on hold or the Answering System is handling a call. · If this function does not operate properly, consult your telephone company for details. Telephone System Call Waiting Caller ID display Handset If you subscribe to both Caller ID and Call Waiting with Caller ID services (CWID), when a second call is received while talking, the second caller's information will be displayed. After you hear a call waiting tone while talking, the display shows the caller's name with the phone number and "Waiting". BROWN, NANCY 1-555-666-7777 ----Waiting----- Answering System Useful Information 57 · Contact your telephone company for details about availability in your area, and to verify that CWID service is activated on your telephone line. · The caller's information will only be shown on the display of the handset which is on the outside call. · The second caller's name will not be announced even if the Talking Caller ID feature is on (p. 33). For assistance, please call: 1-800-211-PANA(7262) TG5240. fm Page 58 Wednesday, September 22, 2004 3:45 PM Special Features FLASH Button Handset Base Unit Pressing [FLASH/CALL WAIT] allows you to use special features of your host PBX such as transferring an extension call, or accessing optional telephone services such as call waiting. · Pressing [FLASH/CALL WAIT] cancels the mute or the Temporary Tone Dialing mode (p. 56, 57). Selecting the flash time Handset The flash time depends on your telephone exchange or host PBX. You can select the following flash times: "700, 600, 400, 300, 250, 110, 100 or 90 ms (milliseconds)". The factory preset is "700 ms". · If PBX functions do not work correctly, consult your PBX supplier for the correct settings. 1 Press [MENU]. 2 Scroll to "Initial setting" by pressing [d] or [B], then press the soft key ( SELECT ). Initial setting Set tel line Set flash time Set flash time 3 Scroll to "Set tel line" by pressing [d] or [B], then press the soft key ( SELECT ). 4 Scroll to "Set flash time" by pressing [d] or [B], then press the soft key ( SELECT ). 5 Select the flash time by pressing [d] or [B]. :700ms 6 Press the soft key ( SAVE ), then press [OFF]. 58 TG5240. fm Page 59 Wednesday, September 22, 2004 3:45 PM Special Features Incoming Call Tone Handset Base Unit During an intercom call (p. 47) or while using the Room Monitor feature, you can be informed of incoming calls by two tones. If this feature is turned on, incoming call tones will be heard for as long as the line is ringing. If this feature is set to "2", incoming call tones will be heard only 2 times. [. . . ] If the known working phone operates properly, have your unit repaired by one of the authorized Panasonic Factory Service Centers. If the known working phone does not operate properly, consult your telephone company. 98 TG5240. fm Page 99 Wednesday, September 22, 2004 3:45 PM Index A Accessories . 47, 80, 81 F FCC and other information . 7, 8 Preparation Telephone System Answering System Useful Information - Greeting message . [. . . ]