User manual PANASONIC KX-TG5432

[. . . ] TG5431_5432_5433(e). book Page 1 Friday, January 14, 2005 4:11 PM Operating Instructions 5. 8 GHz Digital Cordless Answering System Model No. KX-TG5431 KX-TG5432 KX-TG5433 5. 8 GHz Digital Cordless Answering System with Dual Handsets Model No. Model shown is KX-TG5431. 5. 8 GHz Digital Cordless Answering System with Three Handsets Model No. This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider. Charge the battery for 6 hours before initial use. Please read these Operating Instructions before using the unit and save for future reference. [. . . ] *3 If you program these settings using one of the handsets, you will not need to program the same item using another handset (KX-TG5432 and KX-TG5433 only). *4 KX-TG5432 and KX-TG5433 only Note: L To exit programming, press {OFF} at any time. L To go back to the previous menu, press {<} or {Back}, or press {>} or {Select} while "(Go back)" is displayed. 36 For assistance, please call 1-800-211-PANA (7262). TG5431_5432_5433(e). book Page 37 Friday, January 14, 2005 4:11 PM Programmable Settings Ringer settings Handset ringer volume 4 levels (high/medium/low/off) are available. The default setting is HIGH. Handset ringer tone You can change the ringer tone heard when an outside call is received. The default setting is "Tone 1". 1 2 Press {MENU}. Scroll to "Ringer setting" by pressing {V} or {^}, then press {>}. 1 2 Press {MENU}. Scroll to "Ringer setting" by pressing {V} or {^}, then press {>}. Ringer setting 3 3 Scroll to "Ringer volume" by pressing {V} or {^}, then press {>}. Ringer setting Scroll to "Ringer tone" by pressing {V} or {^}, then press {>}. Ringer volume 4 4 Press {V} or {^} repeatedly to select the desired volume. Ringer tone Press {V} or {^} repeatedly to select the desired setting. Ringer volume Low |||||| High KBack dB SaveL L To turn the ringer off, press {V} repeatedly until "Off ?" is displayed. Ringer tone 1=Tone 1 KBack dB SaveL L You can also select the ringer tone by pressing {1} to {7}. L If the ringer volume has been turned off, the handset will not ring. 5 Press {Save}. Note: L When the ringer volume is set to off, the handset will display "Ringer off", and will not ring for outside calls. The handset will ring at the low level for intercom calls. 5 Press {Save}, then press {OFF}. Note: L If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (Tone 1 to 3). If you select a melody, you will not be able to distinguish lines by their ringers. L If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if: ­ the caller hangs up before you answer the call. ­ another person answers the call using another phone connected on the same line. For assistance, please call 1-800-211-PANA (7262). 37 TG5431_5432_5433(e). book Page 38 Friday, January 14, 2005 4:11 PM Programmable Settings Handset interrupt tone This tone lets you know when you receive a call while you are on an intercom call (page 30). "2" (default): The tone will sound 2 times. "On": The tone will sound for as long as the line rings. "Off": Turns this feature off. Call options Auto talk When this feature is turned on, you can answer a call by lifting the handset off the base unit or charger without pressing {C}. The default setting is OFF. 1 2 3 4 5 Press {MENU}. Scroll to "Ringer setting" by pressing {V} or {^}, then press {>}. Scroll to "Interrupt tone" by pressing {V} or {^}, then press {>}. Press {V} or {^} repeatedly to select the desired setting. Press {Save}, then press {OFF}. 1 2 3 4 5 Press {MENU}. Scroll to "Initial setting" by pressing {V} or {^}, then press {>}. Scroll to "Auto talk" by pressing {V} or {^}, then press {>}. [. . . ] When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. For assistance, please call 1-800-211-PANA (7262). 69 TG5431_5432_5433(e). book Page 70 Friday, January 14, 2005 4:11 PM Useful Information Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. [. . . ]