User manual PANASONIC KX-TG8423E

[. . . ] TG8421E(e). book Page 1 Tuesday, December 16, 2008 8:03 AM Operating Instructions Digital Cordless Answering System Model No. KX-TG8421E KX-TG8422E KX-TG8423E KX-TG8424E Model shown is KX-TG8421. Thank you for purchasing a Panasonic product. This unit is compatible with Caller ID and SMS. You must subscribe to the appropriate service offered by your service provider/telephone company. Charge the batteries for about 7 hours before initial use. [. . . ] This allows the handset to end its wireless connection with the system. 1 2 3 1 (centre of joystick) i !i M {3}{3}{5} {V}/{^}: "Cancel Register" i M L The numbers of all handsets registered to the base unit are displayed. Select the handset(s) you want to cancel by pressing the desired handset number. i M L The selected handset number(s) flashes. L To cancel a selected handset number, press the number again. {V}/{^}: "Yes" i M 5 4 Note: L When you purchase an additional handset, refer to the additional 5 28 Helpline Tel. 01289 8333 TG8421E(e). book Page 29 Tuesday, December 16, 2008 8:03 AM Programming L A confirmation tone sounds as each handset number disappears. L The handset does not beep when cancelling its own registration. L Do not use more than one repeater at a time. Setting the repeater mode 6 1 2 3 {ih} 1 (centre of joystick) i !i M {V}/{^}: "Repeater" i M {V}/{^}: Select the desired setting. i M i {ih} Cancelling a base unit A handset can cancel a base unit that it is registered to. This allows the base unit to end its wireless connection with the system. 1 2 3 4 5 1 (centre of joystick) i N i M {V}/{^}: "Register" i M {3}{3}{5} {V}/{^}: "Cancel Base" i M Select the base unit(s) you want to cancel by pressing the desired base unit number. i M L The selected base unit number(s) flashes. L To cancel a selected base unit number, press the number again. {V}/{^}: "Yes" i M i {ih} Note: L After turning the repeater mode on or off, w flashes on the handset momentarily. This is normal and the handset can be used once w stops flashing. 6 Note: L To register a handset to another base unit or to the same base unit again, see page 28. Increasing the range of the base unit You can increase the signal range of the base unit by using a DECT repeater. Please use only the Panasonic DECT repeater noted on page 4. Contact your Panasonic dealer for details. Important: L Before registering the repeater to this base unit, you must turn the repeater mode on. 01289 8333 29 TG8421E(e). book Page 30 Tuesday, December 16, 2008 8:03 AM Caller ID Service Using Caller ID service Important: L This unit is Caller ID compatible. To use Caller ID features, you must subscribe to a Caller ID service. [. . . ] After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact your nearest Panasonic service centre. Caution: L To avoid permanent damage, do not use a microwave oven to speed up the drying process. Helpline Tel. 01289 8333 57 TG8421E(e). book Page 58 Tuesday, December 16, 2008 8:03 AM Useful Information Conditions of guarantee This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. [. . . ]