User manual PANASONIC KX-TG9331

[. . . ] L Do NOT use Alkaline/Manganese/Ni-Cd batteries. L Ensure correct polarities (S, T) when installing the batteries. Rechargeable Ni-MH ONLY Confirm "Charging" is displayed. Charger*1 L Use only the supplied Panasonic AC adaptor PQLV209. (120 V AC, 60 Hz) *1 KX-TG9332/KX-TG9333/KX-TG9334/KX-TG9342/KX-TG9343/KX-TG9344 PNQW1005ZA DC1207PY0 TG934x_QG(e). fm Page 2 Wednesday, December 5, 2007 10:12 AM Operating tips Using the navigator key The handset navigator key can be used to navigate through menus and to select items shown on the display by pressing {^}, {V}, {<}, or {>}. To adjust the receiver or speaker volume, press {^} to increase the volume, or press {V} to decrease the volume repeatedly while talking. Volume up {^} {<} {>} {V} Volume down Soft keys The handset features 2 soft keys. [. . . ] L To turn the ringer off, press and hold {V} until the unit beeps 2 times. Shared phonebook (Handset) Adding entries 1 {Phonebook} i {Add} 2 Enter the party's name (16 characters max. ). i {Next} 3 Enter the party's phone number (32 digits max. ). i {Next} i {Save} i {OFF} L To enter a name, see the character table in the operating instructions. Making calls {Phonebook} i {Search} i {V}/{^}: Select the desired entry. i {C} Press {ANSWER ON} to turn on/off the answering system. {6} Answering system (Base unit) Answering on/off Listening to messages ­3­ TG934x_QG(e). fm Page 4 Wednesday, December 5, 2007 10:12 AM Frequently asked questions Question How can I increase the handset volume level?Why is the conversation noisy or cutting off?Cause/solution L Press navigator key {^} repeatedly while talking. L Try to relocate the base unit so that distance from location to use the handset will be minimized. L If the same problem occurs even if the handset is next to the base unit, send your unit for service. L Yes, you can add up to 6 handsets (including the handset(s) sold with your own base unit) to a single base unit. L To purchase accessory handset (KX-TGA630/KXTGA930/KX-TGA935), please visit http://www. panasonic. com or call 1-800-332-5368. TTY users (hearing or speech impaired users) can call 1-866-605-1277. L You can leave the handset on the base unit or charger anytime. L Press {CALL WAIT} when you hear call waiting tone. Can I add another accessory handset to my base unit? Can I keep batteries charging all the time?How can I answer a call waiting call (2nd call)? For further information, visit http://www. panasonic. com/help or refer to operating instructions. ­4­ TG934x_QG(e). fm Page 5 Wednesday, December 5, 2007 10:12 AM Quick troubleshooting 1 Handset shows: "No link to base. Reconnect AC adaptor. " Place the handset on the base unit, then check if "Charging" is displayed. "Charging" is not displayed. "Charging" is displayed, now. "Charging" is displayed. Unplug and then plug AC adaptor properly to both the base unit and AC outlet. "Charging" is still not displayed. Lift the handset, then try again. [. . . ] Your telephone may need service when only back speaker provides a dial tone. Try to connect your telephone into a different line. Try remedy for 1 on previous page. Still displayed Your telephone may need service. Please visit http://www. panasonic. com/help for further troubleshooting. ­6­ TG934x_QG(e). fm Page 7 Wednesday, December 5, 2007 10:12 AM Registering a handset to a base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, register the handset. Handset 5 {MENU} i {#}{1}{3}{0} Press LOCATOR on base for 4sec Then press OKL {MENU} Base unit Press and hold {LOCATOR} for 4 seconds until the registration tone sounds. L The next step should be completed within 90 seconds. [. . . ]