User manual PANASONIC KX-TS730

[. . . ] Operating Instructions Conference Recording Speakerphone System Model No. KX-TS730 This unit is compatible with Caller ID. To use this feature, you must subscribe to the appropriate service offered by your service provider. Please read these Operating Instructions before using the unit and save for future reference. For assistance, visit our website: http://www. panasonic. com for customers in the U. S. A. [. . . ] L "All erase?" will be displayed. L To cancel erasing, press {NO} ({F1} key). Press {YES} ({F2} key). 1 2 Press {<} or {>} to enter the caller list. Press {<} or {>} repeatedly to display the desired item. L To edit the number, press {EDIT} ({F2} key) repeatedly until the number is shown in the desired format (page 15, step 3). L If there is no name information for the caller, "Enter name" will be displayed. 1 Enter the name if necessary (page 11, step 3). L To continue storing other items, repeat from step 2. Press {STOP} to exit. 3 3 4 Note: L If the caller information in the caller list does not include a phone number, you cannot store it in the phonebook. Erasing caller information Erasing a selected item 1 2 3 Press {<} or {>} to enter the caller list. Press {<} or {>} repeatedly to display the desired item. L To erase other items, repeat from step 2. L To exit the caller list, press {STOP}. Erasing all items Make sure that you have no missed calls. 16 For assistance, please visit http://www. panasonic. com/consumersupport. Programmable Settings Programming via direct commands You can program features using "direct commands" special codes that take you directly to the feature you wish to program and allow you to select the desired setting. There is no need to scroll through the unit's sub-menus. Details of each feature can be found on the corresponding pages. Important: L Before programming, make sure the unit is not being used. 1 2 Press {MENU} ({F2} key). Press {#}. Enter direct No. : 3 4 5 6 BACK Enter the desired feature code (shown below). Enter the desired setting code (shown below). L This step may vary depending on the feature being programmed. Press {STOP} to exit programming mode. Note: L If the unit beeps 5 times, you entered an invalid code. L If you make a mistake or enter the wrong code, press {CLEAR}. Direct commands chart Note: L The default settings are indicated by *. Feature Ringer volume Ringer tone LCD contrast Key tone Caller ID number auto edit Set dial mode Feature code {1} {6} {0} {1} {6} {1} {1} {4} {5} {1} {6} {5} {2} {1} {4} {1} {2} {0} Setting code {1}: Low {2}: Medium {3}: High* {0}: Off {1}{3}: Tone pattern 1*3 {1}{6}: Level 16 (Default: 3) {1}: On* {0}: Off {1}: On* {0}: Off {1}: Pulse {2}: Tone* Page page 19 page 19 page 19 page 20 page 20 page 8 For assistance, please visit http://www. panasonic. com/consumersupport 17 Programmable Settings Feature Set flash time Feature code {1} {2} {1} Setting code {1}: 900 ms {2}: 700 ms* {3}: 600 ms {4}: 400 ms {5}: 300 ms {6}: 250 ms {7}: 200 ms {8}: 160 ms {9}: 110 ms {0}: 100 ms {*}: 90 ms {#}: 80 ms {1}: English* {2}: Spanish Page page 20 Change language {1} {1} {0} page 19 Programming using the function keys You can program features using the functions keys ({F1}, {F2} and {F3} keys). For your reference, a chart of all programmable functions is printed below. [. . . ] When shipping the unit carefully pack, include all accessories, and send it prepaid, adequately insured and preferably in the original carton. Include a letter detailing the complaint and provide a day time phone number where you can be reached. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE. For assistance, please visit http://www. panasonic. com/consumersupport 29 Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. [. . . ]