User manual PANASONIC KX-TSC14

[. . . ] Integrated Telephone System Preparation Operating Instructions Model No. KX-TSC14B KX-TSC14W Pulse-or-tone dialing capability Basic Operation Advanced Operation KX-TSC14W Useful Information 2 LINE Caller ID Compatible PLEASE READ BEFORE USE AND SAVE. Panasonic World Wide Web address: http://www. panasonic. com for customers in the USA or Puerto Rico Before Initial Use Please read IMPORTANT SAFETY INSTRUCTIONS on pages 48­49 before use. Read and understand all instructions. Thank you for purchasing your new Panasonic integrated telephone. Caller ID and Call Waiting Service, where available, are telephone company services. After subscribing to Caller ID, this phone will display a caller's name and phone number. Call Waiting Caller ID, which displays a second caller's name and phone number while the user is on another call, requires a subscription to both Caller ID and Call Waiting. Attach your purchase receipt here. For your future reference Serial No. (found on the bottom of the unit) Date of purchase Name and address of dealer 2 Accessories (included) To order, call 1-800-332-5368. AC Adaptor . [. . . ] The display will return to step 1. 11:50AM11/24 CLEAR AUTO 1 Dialing a Stored Number Advanced Operation 1 2 3 Lift the handset or press (SP-PHONE/HEADSET). Press (AUTO). Memory Station Numbers (AUTO) Press the memory station number ((0) to (9)). The stored number is dialed. (SP-PHONE/HEADSET) 33 Voice Mail Service Voice mail service is an electronic on-line answering system offered by your telephone company. After you subscribe, the voice mail system can answer calls automatically when the line is busy or if calls are not answered. Callers can leave messages by following the pre-recorded instructions. When voice mail messages are recorded, " " will flash. You can access the voice mail system quickly by using the (VOICE\MAIL) button. To use the (VOICE\MAIL) button, you must store your access phone number for the line first. (FUNCTION/EXIT) (CLEAR) Line Buttons (VOICE\MAIL) Display (_), (^), (fl) OK/EDIT (SP-PHONE/HEADSET) 34 " Storing an Access Number in Your Voice Mail Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 2 3 4 5 6 7 Press (FUNCTION/EXIT). 11:50AM11/24 SAVE AUTO# ? Press (_) or (^) repeatedly until "SAVE MAILBOX# ?" is displayed. Press (fl) OK/EDIT. 11:50AM11/24 SAVE MAILBOX# ? 11:50AM11/24 LINE1 Press (_) or (^) to select the desired line, "LINE1" or "LINE2". Press (fl) OK/EDIT (NEXT key). "ENTER MAILBOX#" is displayed. The current number will be displayed, if it was stored beforehand. 11:50AM11/24 1=NEXT LINE2 11:50AM11/24 1=NEXT ENTER MAILBOX# Advanced Operation Enter your access phone number up to 32 digits. You may enter pauses*. Digits are erased from the right. 11:50AM11/24 1234567PPP8901 1=SAVE Press (fl) OK/EDIT (SAVE key). A beep sounds and the number is saved. To program the other line, start from step 3. To return to the standby mode, press (FUNCTION/EXIT). 11:50AM11/24 1234567PPP8901 SAVE MAILBOX# You can exit the programming mode any time by pressing (FUNCTION/EXIT). *For quick access to your voice mail box by using (VOICE\MAIL), you may add pauses between your voice mail box access number and your mail box password in step 6. 1-222-333-4444 PPPP 8888 Your mail box Your voice mail box access number password Pauses Pressing (REDIAL/PAUSE) once creates a 3. 5 second delay and counts as one digit. The delay time depends on a telephone company. 35 " Voice Mail Service Setting the Voice Mail Tone If your voice mail service sends a voice mail tone after a new message has finished recording, set to "ON". " " icon will flash on the display if a message was recorded in your mailbox. You will hear a series of voice mail tones then a dial tone after lifting the handset or pressing (SP-PHONE/HEADSET). (Contact your service provider about your service. ) Set to "OFF" when: --you do not subscribe to a voice mail service. --your voice mail service does not send a voice mail tone, or --the unit is connected to a PBX. Your phone comes from the factory set to "ON". Make sure that the handset is on the cradle, the AC adaptor is connected and the SP-PHONE/HEADSET indicator light is off. 1 2 3 4 5 6 7 Press (FUNCTION/EXIT). 11:50AM11/24 SAVE AUTO# ? Press (_) or (^) repeatedly until "VOICE MAIL TONE?" is displayed. Press (fl) OK/EDIT. 11:50AM11/24 VOICE MAIL TONE? 11:50AM11/24 LINE 1 LINE1 Press (_) or (^) to select the desired line, "LINE1" or "LINE2". [. . . ] Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ]