User manual PANASONIC KXHN6003

[. . . ] This document explains how to install the smart plug properly. For details about how to use the system, refer to the User’s Guide (page 9). Please read this document before using the unit and save it for future reference. For assistance, visit our Web site: www. [. . . ] For details, refer to the System Setup Guide included with your hub. Connection Connect the smart plug to the power outlet and connect the desired electric device to the smart plug. Registration Required only if the smart plug was purchased separately (i. Confirm the usage area Read the information in this document to confirm that the LED indicator You can use the LED indicator to confirm the smart plug’s status. Indicator Off Status No power, smart plug is off, or LED indicator is turned off*1 Smart plug is on*1 Registration mode 2 3 Green, lit Green, blinking 4 6 For assistance, please visit www. Com/support Setup desired usage area is suitable to proper operation. Weight of the smart plug may cause it to become disconnected. R If the electric device connected to the smart plug draws more than 10 A or 1, 200 W of power, the smart plug will turn off automatically. R In the event of a power failure, the smart plug may not turn back on after power is restored. For this reason, connecting refrigerators or other devices that require constant power supply should not be connected to the smart plug. R After connecting an electric device to the smart plug, make sure the smart plug is firmly connected to the power outlet. Connections Firmly insert the smart plug (1) into the power outlet. Firmly insert the AC plug of the desired electric device (2) into the smart plug. A B 1 2 1 2 Note: R You can turn the power supplied to the smart plug’s power outlet on and off by pressing M N. Note about connections R The smart plug should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the smart plug to a ceiling-mounted AC outlet, as the For assistance, please visit www. Com/support 7 Setup Registering the smart plug This procedure is not required for devices that were included as part of a bundle. Before you can use the smart plug, it must be registered to the hub. , not as part of a bundle), you must register each device to the hub. You can register each device by using the registration buttons or the [Home Network] app. Using the app When you register the smart plug by using the [Home Network] app, you can assign a name to your devices and group them by location. For more information, refer to the User’s Guide (page 9). [. . . ] This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. Mail-In Service--Online Online Repair Request To submit a new repair request and for quick repair status visit our Web Site at www. Com/repair When shipping the unit carefully pack in a padded shipping carton, include all accessories, and send it prepaid. Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. [. . . ]