User manual PANASONIC KX-HNC800

[. . . ] This document explains how to configure the camera and access it using a mobile device. These steps must be followed before you can use the camera. For details about how to use the camera, refer to the User’s Guide (page 31). Please read this document before using the unit and save it for future reference. [. . . ] 9 10 When prompted, set the 11 When prompted, enter a name for your mobile device and then tap [OK]. R This setting allows you to change the name assigned to your device. It can help you identify your mobile device when performing certain operations, such as deregistering a mobile device. R A list of all cameras registered to the app is displayed when initial setup is complete. 8 If necessary, enter the password required to connect to your wireless router and then tap [Next]. R The camera and your mobile device connect to your wireless router. R If prompted, follow the on-screen instructions and connect your mobile device to your wireless router, start 20 For assistance, please visit http://shop. Pdf 20 2016/09/05 17:54:31 Setup Initial setup (for Android device users) R Do not perform this procedure if you want to integrate the camera with your Home Network System. R If your mobile device is already registered to a hub and you want to use your camera by itself, see “Information for current hub users”, page 22. 5 When prompted, press the MSETUPN button on the back of the camera. R The app temporarily changes your mobile device’s Wi-Fi setting so that it connects to the camera directly. 6 If necessary, enter the password required to connect to your wireless router and then tap [Next]. R The camera and your mobile device connect to your wireless router. R If you enter the wrong password, an error is displayed. Repeat the initial setup procedure from the beginning. 1 Plug in the camera and wait about 1 minute for the camera’s LED to light in green. R If the LED does not light in green, or if you experience trouble during this procedure, reset the camera (page 25) and then repeat this procedure. R If prompted, follow the on-screen instructions and select the appropriate region/country. 7 When prompted, press the MSETUPN button on the back of the camera. r The camera registers your mobile device. 8 When prompted, set the password that will be used to access the camera. 9 When prompted, enter a name for your mobile device and then tap [OK]. [. . . ] The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Home Network System Products microSD card (Included model only) Parts One (1) Year 90 days Labor One (1) Year N/A During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). [. . . ]