User manual PANASONIC KXHNH100

[. . . ] KX-HNH100 Before initial use, see “Getting Started” on page 9. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 48. [. . . ] Important: R To use the voice mail service provided by your service provider/telephone company rather than the unit’s answering system, Advanced configuration (static IP settings) After using the procedure explained in “Wi-Fi network access settings”, page 29, use the procedure below to set the hub’s IP settings manually if necessary. This procedure is not necessary for most users. Unit checks the phone line to see if new voice mail messages have been recorded. Turn this feature off when: – You do not subscribe to voice mail service. € Your service provider/telephone company does not send voice mail tones. – Your phone is connected to a PBX. If you are not sure which setting is required, contact your service provider/telephone company. Storing the voice mail (VM) access number In order to listen to your voice mail messages, you must dial your service provider/telephone company’s voice mail access number. Once you have stored your voice mail access number, you can dial it automatically (page 30). Enter your access number (24 digits max. A MSAVEN a MOFFN Note: R When storing your voice mail access number and your mailbox password, press MDN (Pause) to add pauses (page 13) between the access number and the password as necessary. Contact your service provider/telephone company for the required pause time. A MSAVEN a MOFFN Listening to voice mail messages The unit lets you know that you have new voice mail messages in the following way: – “New Voice Mail” is displayed if message indication service is available. To erase the voice mail access number 1 2 MMENUN#331 Press and hold MCLEARN until all digits are erased. A MSAVEN a MOFFN Note: R You can also use the MVMN soft key, if displayed, to play new voice mail messages. R If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding # until the handset beeps. Voice mail (VM) tone detection Your service provider/telephone company sends special signals (sometimes called “voice mail tones” or “stutter tones”) to the unit to let you know you have new voice mail messages. If you hear a series of dial tones followed by a continuous dial tone after you N on the handset, you have new press M voice mail messages. Soon after you hang up a call or after the phone stops ringing, your 30 For assistance, please visit www. Pdf 30 2014/08/14 11:37:20 Answering System Answering system The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting “Greeting only” as the recording time setting (page 36). Important: R Make sure the unit’s date and time setting is correct. [. . . ] Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. For Limited Warranty service for headsets if a headset is included with this product please follow instructions above. [. . . ]