User manual PANASONIC KX-HNK101FX

[. . . ] Operating Instructions Home Network System Access Keypad Model No. KX-HNK101FX Thank you for purchasing a Panasonic product. This document explains how to operate the access keypad properly. For details about how to use the system, refer to the User’s Guide (page 16). Please read this document before using the unit and save it for future reference. Table of Contents Introduction Accessory information . . . . . . . . . . . . . . . 3 Important Information About this system . . . . . . . . . . . . . . . . . . . . . . 4 For your safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Important safety instructions . . . . . . 5 For best performance . . . . . . . . . . . . . . . . 5 Other information . . . . . . . . . . . . . . . . . . . . . . . 6 Setup Part names and functions . . . . . . . . . . 8 Touchpanel buttons . . . . . . . . . . . . . . . . . . . 8 LED indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Setup overview . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Registering the keypad . . . . . . . . . . . . . . 9 Confirming the usage area . . . . . . 10 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Appendix Using the keypad . . . . . . . . . . . . . . . . . . . . . 16 Features available when using the [Home Network] app . . . . . . . . . . . . . . . . 16 Accessing the User’s Guide . . . . 16 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2 Introduction Accessory information Supplied accessories No. A B C D *1 A Accessory item/Part number AC adaptor/PNLV226CE Mounting bracket*1 Wall mounting screws (25 mm) Wall anchors Quantity 1 1 2 2 The mounting bracket is attached to the product at the time of shipment. [. . . ] R Operating the product near electrical appliances may cause interference. Move away from the electrical appliances. R Do not use any cleaning products that contain alcohol, polish powder, powder soap, benzine, thinner, wax, petroleum, or boiling water. Also do not spray the product with insecticide, glass cleaner, or hair spray. This may cause a change in colour or quality of the product. Disposal of Old Equipment (Only for European Union and countries with recycling systems) Other information Routine care R Wipe the outer surface of the product with a soft moist cloth. R Remove any dirt from the touchpanel by wiping it with a soft, dry cloth. When wiping the touchpanel, use your fingers to gently hold it in place, taking care not to scratch it with your fingernails. This symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products must not be mixed with general household waste. For proper treatment, recovery and recycling of old products, please take them to applicable collection points in accordance with your national legislation. By disposing of them correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment. For more information about collection and recycling, please contact your local municipality. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation. For business users in the European Union If you wish to discard electrical and electronic equipment, please contact 6 Important Information your dealer or supplier for further information. Information on Disposal in other Countries outside the European Union This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. 7 Setup Part names and functions D A B C Touchpanel buttons These buttons allow you to confirm and change the system’s arm mode. During normal operation, the button that corresponds to the current arm mode is lit by default, and all other buttons are dimmed. When you tap the touchpanel, the arm mode buttons light for 10 seconds. During this time, you can tap an arm mode button to switch to the corresponding arm mode. Button Status No power, or buttons are turned off*1. Normal operation, [Arm: At Home] mode is selected. Normal operation, [Arm: Away] mode is selected. Normal operation, [Disarm] mode is selected. [. . . ] Connect the AC adaptor plug to the keypad until you hear a click (A) and connect the AC adaptor to the power outlet (B). 1 2 Note about power connections AC adaptor connection R The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use. ) R The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected. Power failure R The keypad will not work during a power failure. 15 Appendix Using the keypad Changing the arm mode 1 Tap the touchpanel to light the arm 2 mode buttons. [. . . ]