User manual PANASONIC KXMB2000FR

[. . . ] Operating Instructions Multi-Function Printer This pictured model is KX-MB2010. KX-MB2000FR KX-MB2000GX KX-MB2010FR KX-MB2010GX KX-MB2025FR 1 Model No. KX-MB2025JT KX-MB2025SP KX-MB2030FR KX-MB2030JT KX-MB2030SP 2 Do NOT connect the unit to a computer with the USB cable until prompted to do so during the setup of Multi-Function Station (CD-ROM). FOR ENGLISH USERS: You can select English for the display and report (feature #110, page 60). KX-MB2025/KX-MB2030 only: R This unit is compatible with Caller ID. You must subscribe to the appropriate service offered by your service provider/telephone company. For Caller ID service availability, contact your telephone company. [. . . ] Programmable Features Feature/Code Setting recall/flash time MBNM1NM2NM1N (KX-MB2025/KX-MB2030 only) Selection The recall/flash time depends on your telephone exchange or host PBX. M0N "900ms" M1N "700ms" M2N "600ms" M3N "400ms" M4N "300ms" M5N "250ms" M6N "200ms" M7N "160ms" M8N "110ms" M9N "100ms" MGN "90ms" MBN "80ms" Note: R The default may vary depending on the model. R If the unit is connected via a PBX, PBX functions (transferring a call, etc. ) might not work correctly. Consult your PBX supplier for the correct setting. Changing the LCD display contrast MBNM1NM4NM5N Selecting the scale MBNM1NM4NM7N M1N "NORMAL" (default) M2N "DARKER" M1N "MILLIMETRES" (default) M2N "INCHES" Note: R The selected scale will be used when measurements are shown on the unit's display. Changing the password for feature programming via remote operation MBNM1NM5NM5N 1. A MSetN R The default password is "1234". Enter a new 4-digit password using 0­9. A MSetN A MMenuN Note: R It is recommended that you change this password from the default password. R This password is also used for feature programming via a web browser (KX-MB2000/KX-MB2010/KX-MB2030, LAN connection only). Setting the toner maintenance time MBNM1NM5NM8N The unit will automatically activate for maintenance, once every 24 hours. Because this is to prevent the toner from solidifying, the noise that the unit makes during maintenance cannot be stopped. However, if the unit's noise bothers you, you can change the start time. R The default time is "12:00". R If you selected 12-hour time entry (page 22), press MHN repeatedly to select AM or PM. R If you selected 24-hour time entry (page 22), the time is set using 24-hour time entry. Programmable Features Feature/Code Resetting all features (and deleting all data in memory) MBNM1NM5NM9N Selection Before you dispose of, transfer or return the product, activate this feature to reset all programmable features and to delete all data stored in memory. KX-MB2025/KX-MB2030 only: Phonebook (or caller information) and fax transmission data (journal report and faxes received in memory) will be deleted. M0N "NO" (default) M1N "YES" R Disconnect the telephone line cord (KX-MB2025/KX-MB2030 only), LAN cable (KX-MB2000/KX-MB2010/KX-MB2030 only) and USB cable before activating this feature. A MSetN Setting the ringer pattern MBNM1NM6NM1N (KX-MB2025/KX-MB2030 only) Setting the beep sounds and keytones MBNM1NM6NM5N M1N "A" (default) M2N "B" M3N "C" M0N "OFF": Deactivate this feature. M1N "ON" (default): You will hear confirmation/error beep sounds and keytones. Note: R Even if this feature is set to "OFF", the unit beeps in the following cases: ­ the memory reception alert setting (feature #437 on page 67) is activated (KX-MB2025/KX-MB2030 only). [. . . ] Redistributions of any form whatsoever must retain the following * acknowledgment: * "This product includes software developed by the OpenSSL Project * for use in the OpenSSL Toolkit (http://www. openssl. org/)" * * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED * OF THE POSSIBILITY OF SUCH DAMAGE. * ==================================================================== * * This product includes cryptographic software written by Eric Young * (eay@cryptsoft. com). This product includes software written by Tim * Hudson (tjh@cryptsoft. com). [. . . ]