User manual PANASONIC KX-PRW110FX

[. . . ] Operating Instructions Premium Design Phone with Smartphone Connect Model No. KX-PRW110FX Before initial use, see “Getting Started” on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. To use this unit in your country, first change the unit’s region setting to match your country (page 32). Change the unit’s display language as needed (page 13). [. . . ] Important: R You must store the phone number with an area code in the call barred list. n From the caller list: 1 M N 2 3 4 5 MbN: Select the entry to be barred. a MDetailN a MMenuN MbN: “Save CID” a MOKN MbN: “Caller Barred” a MOKN MbN: “Yes” a MOKN a M N n By entering phone numbers: 1 MMenuN (right soft key) #217 a MAddN 29 PRW110FX(en)_0724_ver012. pdf 29 2013/07/24 13:40:26 Programming Setting the baby monitor Perform the setting operation with the handset to be monitored (for example, the handset placed in a baby’s room). 2 3 4 5 6 MbN: “On” a MOKN MbN: Select “External” to monitor from an outside line. a MEditN a MAddN MbN: “Manual” a MOKN Enter the desired name. a MOKN 2 times R “Baby Monitor” will be displayed. To monitor with a handset The internal baby monitor feature is only available between handsets in the same radio cell. MbN: Select the desired handset number to monitor with. a MOKN R “Baby Monitor” will be displayed. R The registered handset name/number is displayed. Note: R You can also select your smartphone in this feature using a handset, if your smartphone is registered to the base unit (page 40). R When this feature is on, another handset can hear the monitored handset by making an intercom call. 1 2 3 MMenuN (right soft key) #268 MbN: “On” a MOKN Note: R The registered name/number is displayed. Turning off the baby monitor The monitored handset cannot be used while baby monitor is set to “On”. 1 2 3 1 2 3 4 5 6 7 Press MMenuN on the handset being monitored. MbN: “On/Off” a MOKN MbN: “Off” a MOKN a M N Editing an outside monitoring number Press MMenuN on the handset being monitored. MbN: “On/Off” a MOKN MbN: “On” a MOKN MbN: Select the outside line. a MEditN MMenuN a MbN: “Edit” a MOKN Edit the name if necessary. a MOKN Edit the phone number if necessary. a MOKN 2 times To monitor from an outside line n From the phonebook: 1 MMenuN (right soft key) #268 2 3 4 5 6 MbN: “On” a MOKN MbN: Select “External” to monitor from an outside line. a MEditN a MAddN MbN: “Phonebook” a MOKN MbN: Select the phonebook entry. a MOKN MbN: Select the desired phone number. a MOKN R “Baby Monitor” will be displayed. Erasing an outside monitoring number 1 2 3 4 5 6 Press MMenuN on the handset being monitored. MbN: “On/Off” a MOKN MbN: “On” a MOKN MbN: Select the outside line. a MEditN MMenuN a MbN: “Erase” a MOKN MbN: “Yes” a MOKN a M N Note: R If you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. n By entering phone numbers: 1 MMenuN (right soft key) #268 30 PRW110FX(en)_0724_ver012. pdf 30 2013/07/24 13:40:26 Programming Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. Other programming Changing the handset name Each handset can be given a customised name (“Bob”, “Kitchen”, etc. ). [. . . ] R If your wireless router’s client isolation feature (a feature that prevents wireless devices connected to the same wireless router from communicating with each other) is turned on, your base unit and your smartphone will not be able to communicate with each other. Refer to the operating instructions included with your wireless router and make sure that this feature is turned off. R The base unit’s network settings are incorrect. Reset the base unit’s network settings (page 42) and configure the network settings again. [. . . ]