User manual PANASONIC KX-TG3680

[. . . ] Before initial use, see “Getting Started” on page 9. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 54. [. . . ] Note: R When this feature is on, another handset can hear the monitored handset by making an intercom call. 1 2 3 MMENUN#268 MbN: “On” a MSELECTN To monitor from outside If you enable this feature, the unit will call a pre-programmed phone number when the handset detects sound. After you answer the call, you can listen in on the room where the handset is located. Pdf 30 2016/06/03 17:30:18 Programming n From the phonebook: 1 MMENUN#268 2 3 4 5 MbN: “On” a MSELECTN MbN: Select “Outgoing call” to monitor from outside. A MOKN Edit the phone number if necessary. A MOKN a MSELECTN Erasing an outside monitoring number 1 2 3 4 5 6 Press MMENUN on the handset being monitored. mbN: “On/Off” a MSELECTN MbN: “On” a MSELECTN MbN: Select the outside line. MMENUN a MbN: “Erase” a MSELECTN MbN: “Yes” a MSELECTN a MOFFN Note: R If you edit a phonebook entry which is assigned for monitoring, the edited entry does not transfer to the monitor. N By entering phone numbers: 1 MMENUN#268 2 3 4 5 6 MbN: “On” a MSELECTN MbN: Select “Outgoing call” to monitor from outside. Baby monitor sensitivity You can adjust the sensitivity of the baby monitor. Increase or decrease the sensitivity to adjust the sound level needed to trigger the baby monitor feature. R This feature cannot be set during a monitoring call. 1 2 3 Press MMENUN on the handset being monitored. Turning off the baby monitor The monitored handset cannot be used while baby monitor is set to “On”. Answering the baby monitor n When monitoring with a handset: Press M /ZN to answer a call. If you want to respond from the monitoring unit, press MDN (Mute). R The monitoring unit will answer calls automatically when the auto intercom feature is set to “On” (page 17). Note: R If you receive an outside call when communicating with the monitored handset, the interrupt tone sounds. To answer the call, press MOFFN, then press M /ZN. N When monitoring from outside: Answer the call. 1 2 3 1 2 3 4 5 Press MMENUN on the handset being monitored. MbN: “On/Off” a MSELECTN MbN: “Off” a MSELECTN a MOFFN Editing an outside monitoring number Press MMENUN on the handset being monitored. [. . . ] Com/support For the hearing or speech impaired TTY: 1- 877-833-8855 As of June 2015 For assistance, please visit http://shop. ) Panasonic Products Limited Warranty Limited Warranty Coverage (For USA Only) If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “the warrantor”) will, for the length of the period indicated on the chart below, which starts with the date of original purchase (“warranty period”), at its option either (a) repair your product with new or refurbished parts, (b) replace it with a new or a refurbished equivalent value product, or (c) refund your purchase price. The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Telephone Parts One (1) Year Labor One (1) Year During the “Labor” warranty period there will be no charge for labor. [. . . ]