User manual PANASONIC KX-TG4773

[. . . ] Operating Instructions Digital Corded/Cordless Answering System Model No. KX-TG4771 KX-TG4772 KX-TG242SK KX-TG4773 KX-TG243SK Model shown is KX-TG4771. Before initial use, see "Getting Started" on page 8. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Consulte "Guía Rápida Española", página 47. For assistance, visit our Web site: http://www. panasonic. com/help for customers in the U. S. A. [. . . ] a MSELECTN MbN: Select the current setting of the ringer ID. a MSELECTN MbN: Select the desired ringer tone. a MSAVEN MOFFN 1 2 3 Proceed with the operation for your unit. Base unit: MCIDN Handset: MFN CID MbN: Select the desired entry. Press MEDITN repeatedly until the phone number is shown in the desired format. Caller list Important: R Only 1 person can access the caller list at a time. R Make sure the unit's date and time setting is correct (page 12). Viewing the caller list and calling back Base unit / Handset A Local phone number Example: 321-5555 B Area code ­ Local phone number Example: 555-321-5555 C 1 ­ Area code ­ Local phone number Example: 1-555-321-5555 1 2 3 4 Proceed with the operation for your unit. Base unit: MCIDN Handset: MFN CID Press MCN to search from the most recent call, or MDN to search from the oldest call. Proceed with the operation for your unit. Base unit: ­ To call back, lift the corded handset. ­ To exit, press MOFFN. Proceed with the operation for your unit. Handset: M N Caller ID number auto edit feature Base unit / Handset Once you call back an edited number, the unit which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the unit as follows: ­ When the call is being received, the Caller ID number is displayed in the same format as the edited number. ­ After the call has ended, the caller's phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the unit to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that caller's area code are edited automatically. This feature can be set for each unit (page 23). The default setting is "On". Note: R If the entry has already been viewed or answered, " " is displayed, even if it was viewed or answered using another unit. R In step 2, if is displayed, not all of the information is shown. To see the remaining information: Base unit: Press M N. To return to the previous screen, press M N. To return to the previous screen, press MFN. For assistance, please visit http://www. panasonic. com/help 29 TG477x(en-en)_1130_ver021. pdf 29 2011/11/30 15:57:55 Caller ID Service Note: R Phone numbers from the 4 most recently edited area codes are automatically edited. 3 4 5 MSAVEN MbN: "Phonebook" a MSELECTN Continue from step 2, "Editing entries", page 18. Erasing selected caller information Base unit / Handset 1 2 3 4 Proceed with the operation for your unit. [. . . ] Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. For Limited Warranty service for headsets if a headset is included with this product please follow instructions above. IF REPAIR IS NEEDED DURING THE LIMITED WARRANTY PERIOD THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. [. . . ]