User manual PANASONIC KXTG6522

[. . . ] Before initial use, see "Getting Started" on page 10. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte "Guía Rápida Española" , página 56. [. . . ] This feature can help you identify who is calling by using different ringer tones for different groups of callers. When adding an entry to the phonebook, you can assign it to the desired group (page 20). When a call is received from a caller assigned to a group, the ringer you selected for that group rings after caller information is displayed. If you select "Current ringer" (default), the unit uses the ringer tone you selected on page 25 when calls from this group are received. Note: L If the entry has already been viewed or answered, "Q" is displayed, even if it was viewed or answered using another handset. Editing a caller's phone number before calling back You can edit a phone number in the caller list by removing its area code and/or the long distance code "1". Press {EDIT} repeatedly until the phone number is shown in the desired format. 1 Local phone number Example: 321-5555 2 Area code ­ Local phone number Example: 555-321-5555 3 1 ­ Area code ­ Local phone number Example: 1-555-321-5555 Note: L Phone numbers from the 4 most recently edited area codes are automatically edited. L If you move to another area, you can turn this feature off to erase previously edited area codes. To use this feature again, turn it on and reprogram the area codes you want to edit once again. Once you call back an edited number, the handset which was used to call back remembers the area code and format of the edited number. The next time someone calls from the same area code, caller information is customized by the handset as follows: ­ When the call is being received, the Caller ID number is displayed in the same format as the edited number. ­ After the call has ended, the caller's phone number is displayed in the same format as the edited number, when reviewed from the caller list. For example, you can use this feature to set the handset to ignore the area code of callers in your area, so that you can call these local numbers using caller information without dialing the area code. To activate this feature, you must edit an entry in the caller list, then call that number. After that, phone numbers from that caller's area code are edited automatically. This feature can be set for each handset (page 26). L To edit the number, press {EDIT} repeatedly until the phone number is shown in the desired format. Available for: KX-TG6521/KX-TG6531/KX-TG6541 series (page 3) The answering system can answer and record calls for you when you are unavailable to answer the phone. You can also set the unit to play a greeting message but not to record caller messages by selecting "Greeting only" as the recording time setting (page 41). Important: L Only 1 person can access the answering system (listen to messages, record a greeting message, etc. L When callers leave messages, the unit records the day and time of each message. [. . . ] You must mail-in your product prepaid during the Limited Warranty period. This Limited Warranty excludes both parts and labor for batteries, antennas, and cosmetic parts (cabinet). This Limited Warranty only applies to products purchased and serviced in the United States or Puerto Rico. This Limited Warranty is extended only to the original purchaser and only covers products purchased as new. [. . . ]