User manual PANASONIC KX-TG6872

[. . . ] Before initial use, see “Getting Started” on page 10. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 60. [. . . ] MSAVEN MbN: “Call block” a MSELECTN MbN: “Yes” a MSELECTN Edit the phone number if necessary (24 digits max. MSAVEN a MEXITN Handset Setting the first ring for the call block list Handset / Base unit If you do not want the first ring from a number on the call block list to sound, turn the first ring setting to “Off”. A MSAVEN Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN n By entering phone numbers: 1 2 3 4 1 2 3 MMENUN#217 MMENUN a MbN: “Add” a MSELECTN Enter the phone number (24 digits max. MSAVEN a MOFFN Base unit MMENUN#217 a MADDN Enter the phone number (24 digits max. MSAVEN a MEXITN Viewing/editing/erasing call block numbers Handset 1 2 3 MMENUN#217 MbN: Select the desired entry. A MSAVEN a MOFFN To erase a number: MERASEN a MbN: “Yes” a MSELECTN a MOFFN Base unit Blocking incoming calls without phone number You can reject a call when no phone number is provided, such as a call just showing “Out of area”. A MSAVEN Proceed with the operation for your unit. Handset: MOFFN Base unit: MEXITN Note for handset and base unit: R When editing, press the desired dial key to add, MCLEARN to erase. R When viewing, “Block w/o num” is displayed if the blocking incoming calls without phone number feature is turned on. To turn the feature off: MERASEN a MCN 34 For assistance, please visit http://www. This allows the handset to end its wireless connection with the system. 1 Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to the base unit. Important: R See page 5 for information on the available model. MMENUN#131 R All handsets registered to the base unit are displayed. MbN: Select the handset you want to cancel. A MSELECTN MbN: “Yes” a MSELECTN MOFFN 2 3 4 Registering a handset to the base unit The supplied handset and base unit are pre-registered. If for some reason the handset is not registered to the base unit, re-register the handset. 1 2 Handset: MMENUN#130 Base unit: Press and hold MLOCATORN for about 5 seconds until the registration tone sounds. R If all registered handsets start ringing, press MLOCATORN again to stop, then repeat this step. R The next step must be completed within 90 seconds. Handset: Press MOKN, then wait until a long beep sounds. [. . . ] Include a letter detailing the complaint, a return address and provide a day time phone number where you can be reached. Keep the tracking number for your records. A copy of valid registered receipt is required under the 1 year parts and labor Limited Warranty. For Limited Warranty service for headsets if a headset is included with this product please follow instructions above. [. . . ]