User manual PANASONIC KXTG7220FR

[. . . ] Charge the handset battery for 6 hours before initial use. Please read these Operating Instructions before using the unit and save for future reference. For assistance, visit our website: http://www. panasonic. com/phonehelp for customers in the U. S. A. or Puerto Rico. PQQX14929XA TG2631_2 RG3046. book Page 2 Monday, April 24, 2006 10:12 AM Thank you for purchasing a Panasonic cordless telephone. We recommend keeping a record of the following information for future reference. [. . . ] {2}­{7}: 2­7 rings <4> {0}: Toll saver {1}­{3}: Tone <1>­3 {4}­{7}: Melody 1­4 {1}: Low {2}: Medium {3}: <High> {0}: Off {1}: Pulse {2}: <Tone> (page 14) System setting ­ ­ ­ ­ ­ r ­ ­ ­ ­ ­ r LCD contrast (Display contrast) Message alert Message play Recording time Registration Remote code Ring count Ringer tone (Handset)*5 Ringer volume (Handset) Set dial mode {0}{0} {0}{6}{3} {0}{6}{1} {1}{2} {1}{1} {0}{5}{1} ­ r r ­ ­ r 24 For assistance, please visit http://www. panasonic. com/phonehelp PQQX14929XA TG2631_2 RG3046. book Page 25 Monday, April 24, 2006 10:12 AM Programming Feature Set flash time*6 Feature code {0}{5}{2} Setting code {1}: <700ms> {2}: 600ms {3}: 400ms {4}: 300ms {5}: 250ms {6}: 110ms {7}: 100ms {8}: 90ms {1}: A {2}: <B> {1}: <Caller ID[auto]> {0}: Manual {1}: On {0}: <Off> System setting r Set line mode*7 Time (Caller ID subscribers only) Voice enhancer adjustment*8 {0}{5}{3} {0}{9} {5} r r ­ *1 If you subscribe to Caller ID service and want to view the caller's information after lifting up the handset to answer a call, turn off this feature. *2 KX-TG2632 *3 This tone lets you know when you receive a call while you are on an intercom call. If you select "On", the tone sounds repeatedly for as long as the line rings. If you select "2", the tone only sounds 2 times. *4 You can select whether or not key tones are heard when keys are pressed. Includes confirmation tones and error tones. *5 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers. *6 The flash time depends on your telephone exchange or host PBX. The setting should stay at "700ms" unless pressing {Flash} fails to pick up the call waiting call. *7 Generally, the line mode setting should not be adjusted. To stop recording, press {STOP}. 26 For assistance, please visit http://www. panasonic. com/phonehelp PQQX14929XA TG2631_2 RG3046. book Page 27 Monday, April 24, 2006 10:12 AM Answering System Playing back the greeting message Press {GREETING CHECK}. Erasing your greeting message Press {GREETING CHECK}, and then press {ERASE} while your greeting message is playing. Listening to messages using the base unit When new messages have been recorded, the MESSAGE indicator on the base unit flashes. L When you have no new messages, the unit plays back all messages. Adjusting the speaker volume Press {>} or {<} repeatedly while listening to a message. Repeating a message Press {<} during playback. L If pressed within the first 5 seconds of a message, the previous message is played. Skipping a message Press {>} during playback. Pausing a message Press {STOP} during playback. L To stop playback completely, press {STOP} again. Erasing a message Press {ERASE} during playback. Erasing all messages Press {ERASE} 2 times while the unit is not being used. Prerecorded greeting message If you erase or do not record your own greeting message, the unit plays a prerecorded greeting message for callers and ask them to leave messages. [. . . ] The decision to repair or replace will be made by the warrantor. Parts Labor One (1) Year One (1) Year During the "Labor" Limited Warranty period there will be no charge for labor. During the "Parts" Limited Warranty period, there will be no charge for parts. You must mail-in your product prepaid during the Limited Warranty period. [. . . ]