User manual PANASONIC KXTG7511FX

[. . . ] TG7511_7521FX(e). book Page 1 Tuesday, March 9, 2010 3:22 PM Operating Instructions Digital Cordless Phone Model No. KX-TG7511FX KX-TG7512FX KX-TG7521FX Digital Cordless Answering System Model No. Model shown is KX-TG7511. Before initial use, see "Getting Started" on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. This unit is compatible with Caller ID and SMS. You must subscribe to the appropriate service offered by your service provider/telephone company. [. . . ] If you select "No Ringing", the handset never rings during night mode. 1 2 3 4 5 1 i {#}{1}{0}{4} Enter the desired name (max. i M 2 times {ic} 1 2 1 i {#}{2}{3}{9} {V}/{^}: Select the desired setting. i M i {ic} Note: L When the answering system answers the call, this feature does not work. (KX-TG7521) Selecting categories to bypass night mode 1 2 Changing the unit's region setting/Resetting the base unit 1 1 i {#}{1}{3}{6} 2 {V}/{^}: Select the desired country. iM 1 i {#}{2}{4}{1} {V}/{^}: Select your desired categories. i t L "Q" is displayed next to the selected category numbers. L To cancel a selected category, press t again. M i {ic} countries except Czech and Slovakia Czech Slovakia 3 3 {V}/{^}: "Yes" i M i {ic} Note: L You can also select the categories in step 2 as follows: Press {1} to {9}. i M Note: L The following items will be deleted or reset to their default settings: ­ SMS settings (page 28) ­ Answering system settings (KX-TG7521, page 28) ­ Time Adjustment 31 TG7511_7521FX(e). book Page 32 Tuesday, March 9, 2010 3:22 PM Programming ­ Base unit ringer volume (KX-TG7521) ­ Base unit transmission power ­ Privacy mode ­ Base unit PIN ­ Dial mode ­ All SMS messages ­ Caller list ­ Voice mail messages L The following items will be retained: ­ Date and time ­ Handset name ­ Repeater mode ­ Recordings, including your greeting message, caller messages, and recorded conversations (KX-TG7521) ­ Call screening (KX-TG7521) ­ Call barred list L If you select the desired country in step 2, the following default settings will be changed for the selected country's default settings: ­ Recall/flash time (page 27) ­ Display language (page 28) ­ Message centre 1 and 2 (page 28) ­ SMS on/off (page 28) L According to your country selection in step 2, the answering system announcement language changes as follows (KX-TG7521): Incoming call barring (Caller ID subscribers only) This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit sends out a busy tone to the caller, and then disconnects the call. Important: L When the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list (page 37) with 7 after the call is disconnected. Storing unwanted callers You can store up to 30 phone numbers in the call barred list by using the caller list or by entering the numbers directly. Important: L You must store the phone number with an area code in the call barred list. From the caller list: 1 2 3 4 1 2 3 {<} (y) {V}/{^}: Select the entry to be barred. i M i I {V}/{^}: "Caller Barred" i M {V}/{^}: "Yes" i M i {ic} 1 i {#}{2}{1}{7} i m Enter the phone number (24 digits max. ). {ic} - "Other" - English Czech Slovak L After changing the unit's region setting/resetting the base unit, _ is displayed on the handset momentarily. This is normal and the handset can be used once w is displayed. By entering phone numbers: 32 TG7511_7521FX(e). book Page 33 Tuesday, March 9, 2010 3:22 PM Programming Viewing/editing/erasing bar call numbers Important: L The additional handset model recommended for use with this unit is noted on page 5. If another handset model is used, certain operations (handset settings, base unit settings, etc. ) may not be available. Additional base units Handsets can be registered to up to 4 base units, allowing you to add additional base units and extend the area in which your handset(s) can be used. If a handset moves out of range of its base unit when "Auto" is selected on base unit (page 34), it looks for another base unit to make or receive calls. A base unit and the handsets it communicates with is called a "radio cell". Note: L Calls are disconnected when the handset moves from one radio cell to another. 1 2 3 1 i {#}{2}{1}{7} {V}/{^}: Select the desired entry. [. . . ] L Your phone number is permanently withheld or you have not subscribed to the appropriate service. Contact your service provider/telephone company. "FD" is displayed. "FE" is displayed. "E0" is displayed. Answering system (KX-TG7521) Problem The unit does not record new messages. Cause/solution L The answering system is turned off. [. . . ]