User manual PANASONIC KX-TG8011E

[. . . ] To adjust the receiver or speaker volume, press {^} to increase the volume, or press {V} to decrease the volume repeatedly while talking. Volume up {^} {<} {>} {V} Volume down Soft keys The handset features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display. Menu icons When in standby mode, pressing the middle soft key reveals the handset's topmenu. From here you can access various features and settings. [. . . ] Activate the handset display again by: ­ pressing {<} or {>} when on a call. L "LCD Dimming" is set to "Off" while on charge. L Make sure the batteries are installed correctly. L Clean the charge contacts and charge again. L When you are using fully-charged Ni-MH batteries (supplied batteries); In continuous use: 14 hours max. Not in use (standby): 240 hours (10 days) max. L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use). L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby). L Even after the handset is fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries. L If the batteries are fully charged until 1 is displayed, but 3 is displayed after a few calls, replace the batteries with new ones. L The PIN is a 4-digit number that must be entered in order to change certain base unit settings. The default PIN is "0000". Why is the handset display blank or goes dark when on a call? What should I do when the handset does not turn on?How long is the battery operating time? Can I keep the handset on the base unit or charger when I am not using it?What is a PIN? ­5­ TG8011E(e)_QG. fm Page 6 Thursday, June 4, 2009 11:26 AM Frequently asked questions Question What should I do to display caller information?Cause/solution L You must subscribe to a Caller ID service. Contact your service provider/telephone company for details. L The message "You must first subscribe to Caller ID. " will be displayed until you receive caller information after subscribing to a Caller ID service. [. . . ] i Enter the base unit PIN (default: "0000"). i M L When the handset has been registered successfully, w stops flashing. M ­7­ TG8011E(e)_QG. fm Page 8 Thursday, June 4, 2009 11:26 AM Optional service (Caller ID) If you subscribe to a Caller ID service, 012345 ­ caller information will be displayed when a call is received, or when viewing missed calls. ­ you can identify who is calling by using different display colours and ringer tones (phonebook category). 012345 Sales and support information Customer Care Centre L For customers within the U. K. : 0844 844 3898 L For customers within the Republic of Ireland: 01289 8333 L Visit our website for product information: www. panasonic. co. uk L E-mail: customer. care@panasonic. co. uk Direct Sales at Panasonic U. K. L Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday - Thursday 9:00am 5:30pm, Friday 9:30am - 5:30pm (Excluding public holidays). [. . . ]