User manual PANASONIC KXTG8511FX

[. . . ] TG8511_8521FX(e-e). book Page 1 Wednesday, April 14, 2010 5:58 PM Operating Instructions Digital Cordless Phone Model No. KX-TG8511FX KX-TG8521FX Digital Cordless Answering System Model No. Model shown is KX-TG8511. Before initial use, see "Getting Started" on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. This unit is compatible with Caller ID and SMS. You must subscribe to the appropriate service offered by your service provider/telephone company. [. . . ] L If not required, go to step 3. 1 1 (centre of navigator key) i {#}{2}{3}{9} 3M 4 {V}/{^}: Select the desired setting. i M 2 times 2 {V}/{^}: Select the desired setting. i M i {ic} Note: L When the answering system answers the call, this feature does not work. (KX-TG8521) Selecting categories to bypass night mode 5 {ic} Changing the unit's region setting/Resetting the base unit 1 1 (centre of navigator key) i {#}{1}{3}{6} 1 1 (centre of navigator key) i {#}{2}{4}{1} 32 TG8511_8521FX(e-e). book Page 33 Wednesday, April 14, 2010 5:58 PM Programming 2 {V}/{^}: Select the desired country. iM countries except Czech and Slovakia Czech Slovakia L According to your country selection in step 2, the answering system announcement language changes as follows (KX-TG8521): 3 {V}/{^}: "Yes" i M i {ic} Note: L The following items will be deleted or reset to their default settings: ­ SMS settings (page 29) ­ Answering system settings (KX-TG8521, page 28) ­ Time Adjustment ­ Base unit ringer volume (KX-TG8521) ­ Base unit transmission power ­ Privacy mode ­ Base unit PIN ­ Dial mode ­ All SMS messages ­ Caller list ­ Voice mail messages ­ Call restrict L The following items will be retained: ­ Date and time ­ Handset name ­ Repeater mode ­ Recordings, including your greeting message, caller messages, and recorded conversations (KX-TG8521) ­ Call screening (KX-TG8521) ­ Call barred list L If you select the desired country in step 2, the following default settings will be changed for the selected country's default settings: ­ Recall/flash time (page 28) ­ Display language (page 28) ­ Message centre 1 and 2 (page 29) ­ SMS on/off (page 29) - "Other" - English Czech Slovak L After changing the unit's region setting/resetting the base unit, _ is displayed on the handset momentarily. This is normal and the handset can be used once w is displayed. Incoming call barring (Caller ID subscribers only) This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit sends out a busy tone to the caller, and then disconnects the call. Important: L When the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list (page 38) with 7 after the call is disconnected. Storing unwanted callers You can store up to 30 phone numbers in the call barred list by using the caller list or by entering the numbers directly. Important: L You must store the phone number with an area code in the call barred list. From the caller list: 1 {<} (y) 33 TG8511_8521FX(e-e). book Page 34 Wednesday, April 14, 2010 5:58 PM Programming 2 {V}/{^}: Select the entry to be barred. i M i I 2 Enter the current 4-digit base unit PIN (default: "0000"). 3 {V}/{^}: "Caller Barred" i M 3 Enter the new 4-digit base unit PIN. i M i {ic} 4 {V}/{^}: "Yes" i M i {ic} By entering phone numbers: Setting call restriction You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets are to be restricted. Storing area codes here prevents the restricted handsets from dialling any phone number in that area code. 1 1 (centre of navigator key) i {#}{2}{1}{7} i m 2 Enter the phone number (24 digits max. ). i M L To erase a digit, press ^. 3 {ic} Viewing/editing/erasing bar call numbers 1 1 (centre of navigator key) i {#}{2}{5}{6} 1 1 (centre of navigator key) i {#}{2}{1}{7} 2 Enter the base unit PIN (default: "0000"). L If you forget your PIN, contact an authorised service centre. 2 {V}/{^}: Select the desired entry. L To exit, press {ic}. 3 To edit a number: ~ i Edit the phone number. i M i {ic} To erase a number: W i {V}/{^}: "Yes" i M i {ic} Note: L When editing, press the desired dial key to add, ^ to erase. 3 {V}/{^}: Select the handsets to be restricted. i t L All handsets registered to the base unit are displayed. L "Q" is displayed next to the selected handset numbers. L To cancel a selected handset, press t again. "Q" disappears. 4M 5 {V}/{^}: Select a memory location. iM Changing the base unit PIN (Personal Identification Number) Important: L If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, contact an authorised service centre. 6 Enter the phone number or area code to be restricted (8 digits max. ). i M i {ic} L To erase a restricted number, press ^. [. . . ] Contact your service provider/telephone company. "FD" is displayed. "FE" is displayed. "E0" is displayed. Answering system (KX-TG8521) Problem The unit does not record new messages. Cause/solution L The answering system is turned off. L The recording time is set to "Greeting Only". [. . . ]