User manual PANASONIC KX-TG8611FX

[. . . ] TG8611FX(e-e). book Page 1 Friday, June 3, 2011 11:23 AM Operating Instructions Digital Cordless Phone with TFT Colour Display Model No. KX-TG8611FX Before initial use, see "Getting Started" on page 9. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. This unit is compatible with Caller ID and SMS. You must subscribe to the appropriate service offered by your service provider/telephone company. [. . . ] Select the handsets to be restricted by pressing 1 to 6. L All handsets registered to the base unit are displayed. L "Q" is displayed next to the selected handset numbers. L To cancel a selected handset, press the same dial key again. M Select a memory location by pressing 1 to 6. s M Enter the phone number or area code to be restricted (8 digits max. ). s M s {ic} L To erase a restricted number, press ^. 1 2 3 4 1 2 3 {3} (y) {r}: Select the entry to be barred. sMsI {r}: "Caller Barred" s M {r}: "Yes" s M s {ic} 1 (middle soft key) y217 sm Enter the phone number (24 digits max. ). {ic} 3 By entering phone numbers: Viewing/editing/erasing bar call numbers 4 5 6 1 2 3 1 (middle soft key) y217 {r}: Select the desired entry. To edit a number: ~ s Edit the phone number. s M s {ic} To erase a number: W s {r}: "Yes" s M s {ic} Changing the base unit PIN (Personal Identification Number) Important: L If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, contact an authorised service centre. Note: L When editing, press the desired dial key to add, ^ to erase. 30 TG8611FX(e-e). book Page 31 Friday, June 3, 2011 11:23 AM Programming 1 2 3 1 (middle soft key) y132 Enter the current 4-digit base unit PIN (default: "0000"). s M s {ic} Changing the unit's region setting/Resetting the base unit 1 1 (middle soft key) y136 2 {r}: Select the desired country. s M ­ Message centre 1 and 2 (page 24) ­ SMS on/off (page 24) L After changing the unit's region setting/resetting the base unit, _ is displayed on the handset momentarily. This is normal and the handset can be used once w is displayed. Calendar/Schedule You can program 20 schedule alarms for each handset using the calendar. A schedule alarm sounds at the set time for 1 minute. A text memo can also be displayed for the schedule alarm. Important: L Set the date and time beforehand (page 14). L If the unit is connected to a PBX system, date information may not be properly received. Set the PBX system to receive the correct date information. Adding a new entry 3 {r}: "Yes" s M s {ic} Note: L The following items will be deleted or reset to their default settings: ­ SMS settings (page 24) ­ Time Adjustment ­ Base unit transmission power ­ Privacy mode ­ Base unit PIN ­ Dial mode ­ All SMS messages ­ Caller list ­ Voice mail messages ­ Call restrict L The following items will be retained: ­ Display language ­ Date and time ­ Handset name ­ Repeater mode ­ Call barred list L If you select the desired country in step 2, the following default settings will be changed for the selected country's default settings: ­ Recall/flash time (page 26) 1 2 1 (middle soft key) s j s M {r}: Select the desired date. [. . . ] L Turn your mobile phone off, then turn it on and try again. L Your Bluetooth headset is not registered. L Turn your headset off, then turn it on and try again. L A Bluetooth headset can communicate with the handset within a range of approximately 10 m. [. . . ]