User manual PANASONIC KXTGA401

[. . . ] Panasonic Ni-MH battery performance (supplied batteries) Operation In continuous use Not in use (standby) Operating time 13 hours max. A Charge indicator Ringer indicator Message indicator B Nonslip pad L Nonslip pad offers support when you cradle the handset between your shoulder and ear. N Control type A Soft keys The handset features 3 soft keys. By pressing a soft key, you can select the feature shown directly above it on the display. [. . . ] important: L Set the date and time beforehand (page 6). L We recommend turning the base unit ringer off in addition to turning the silent mode on. (KX-TG4021/KX-TG4071 series) L If you have set the alarm, the alarm sounds even if the silent mode is turned on. Enter the desired hour and minute you wish to start this feature. {AM/PM}: Select "AM" or "PM". I {OK} Enter the desired hour and minute you wish to end this feature. Voice mail service: Storing the voice mail (VM) access number Once you have stored your service provider/telephone company's voice mail access number, you can dial it automatically to listen to your voice mail messages. You need to store the voice mail access number to activate the message alert feature (page 11) for voice mail service. 1 {MENU} i {#}{3}{3}{1} 2 Enter your access number (24 digits max. Note: L When storing your voice mail access number and your mailbox password, press {PAUSE} to add pauses between the access number and the password as necessary. Contact your service provider/ telephone company for the required pause time. L To erase the voice mail access number: Press and hold {CLEAR} until all digits are erased in step 2. I {SAVE} i {OFF} Voice mail service: Voice mail (VM) tone detection Your service provider/telephone company sends special signals (sometimes called "voice mail tones" or "stutter tones") to the unit to let you know you have new voice mail messages after you press {C}. Soon after you hang up a call or after the phone stops ringing, your unit checks the phone line to see if new voice mail messages have been recorded. Turn this feature off when: ­ You do not subscribe to voice mail service. ­ Your service provider/telephone company does not send voice mail tones. If you are not sure which setting is required, contact your service provider/telephone company. Voice mail service: Listening to voice mail messages The unit lets you know that you have new voice mail messages: ­ "New Voice Mail" is displayed if message indication service is available. ­ The message indicator flashes slowly if the message alert feature is turned on (page 11). L If there are no new messages in the voice mail, {VM} is not displayed. Note: L If the handset still indicates there are new messages even after you have listened to all new messages, turn it off by pressing and holding {#} until the handset beeps. Turning the time adjustment on/off (Caller ID subscribers only) This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. [. . . ] Some Hearing Aids are not adequately shielded from external RF (radio frequency) energy. If noise occurs, use an optional headset accessory or the speakerphone option (if applicable) when using this phone. Consult with your audiologist or Hearing Aid manufacturer about the availability of Hearing Aids which provide adequate shielding to RF energy commonly emitted by digital devices. WHEN PROGRAMMING EMERGENCY NUMBERS AND(OR) MAKING TEST CALLS TO EMERGENCY NUMBERS: 1) Remain on the line and briefly explain to the dispatcher the reason for the call. [. . . ]