User manual PANASONIC KX-TGA830RU

[. . . ] (found on the bottom of the base unit) Date of purchase Name and address of dealer Note: L In the event of problems, you should contact your equipment supplier in the first instance. Declaration of Conformity: L Panasonic Communications Co. , Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Declarations of Conformity for the relevant Panasonic products described in this manual are available for download by visiting: http://www. doc. panasonic. de Contact: Panasonic Services Europe a Division of Panasonic Marketing Europe GmbH Panasonic Testing Centre Winsbergring 15, 22525 Hamburg, Germany Trademarks: L Eatoni and LetterWise are trademarks of Eatoni Ergonomics, Inc. 2 TCD340FX(e). book Page 3 Wednesday, June 8, 2005 3:57 PM Feature highlights Feature highlights Colour display The handset's colour display allows you to customise the handset to your liking. [. . . ] This feature is useful for times when you do not want to be disturbed, for example, while sleeping. Night mode can be set independently for the handset (page 29) and the base unit. Set the date and time beforehand (page 14). Note: L To avoid disturbances, we recommend turning the call screening feature off (page 54) in addition to turning the night mode feature on. Setting the start and end time for night mode 9 Press , . 10 Press {ih}. Turning night mode on/off 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it (page 37). 4 Select "Ringer Setup", then press , . 5 Select "Night Mode", then press , . 6 Select "On/Off", then press , . 7 Select "On" or "Off", then press , . 8 Press {ih}. Setting the ring delay for night mode This setting allows the base unit to ring during night mode if the caller waits long enough. After the selected amount of time passes, the base unit will ring. If you select "No Ringing", the base unit will not ring during night mode. 1 Press $ (middle soft key). L To turn call restriction off for an extension, press the dial key corresponding to its extension number. The number will stop flashing. Other options Changing the base unit PIN (Personal Identification Number) For security, the base unit PIN must be entered when changing certain settings. Important: L If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre. 7 Press , . 8 Select a memory location, then press , . L If the memory location already contains a restricted number, the number is displayed. 9 Enter the phone number or area code to be restricted (8 digits max. ), then press , . L To erase a restricted number, press {C/T}. 1 Press $ (middle soft key). 3 Enter "0000" (default base unit PIN). L If you changed the PIN, enter it. 4 Select "Other Options", then press , . 10 Press {ih}. Turning call bar on/off This feature prohibits making outside calls with the base unit. When call bar is turned on, only intercom calls and calls to emergency numbers (page 36) can be made. [. . . ] Confirm that the correct SMS message centre numbers are stored (page 42). Confirm that SMS is turned on (page 42). L An error occurred while sending the message. L Your phone number is permanently withheld or you have not subscribed to the appropriate service. [. . . ]