User manual PANASONIC KX-TGB113E

[. . . ] Operating Instructions Digital Cordless Phone Model No. KX-TGB110E KX-TGB112E KX-TGB113E Model shown is KX-TGB110 Before initial use, see “Getting Started” on page 11. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. Table of Contents Introduction Accessory information. . . . . . . . . . . . . . . . . . . . 3 General information. . . . . . . . . . . . . . . . . . . . . . . . 5 Caller ID and Calls list Caller ID and Calls list. . . . . . . . . . . . . . . . . . . . [. . . ] Press and hold to enter a pause (P) when pre-dialling or storing numbers. Intercom Used to make internal calls and transfer calls to other handsets registered to the base, page 18. This feature is not available for single handset model. Redial Press to open the redial list, page 19. Charge contacts Base unit 1 13 14 2 1 15 2 Locator button Use to locate a misplaced handset or when registering additional handsets. Charge contacts Display icons 16 17 Handset name or Time In standby mode, press and hold m to switch handset idle screen between handset name or time. L R Helpline Tel. 0344 844 3899 Ireland 01289 8333 15 Getting Started Signal icon Steady when registered and in range. Flashes when out of range of the base or searching for the base. * Eco mode is ON Zero Emit is ON Handset ringer is off Indicates a missed call Steady when making an outgoing call Flashes to indicate an incoming or internal call Indicates an answered call when viewing the calls list Indicates an outgoing call when viewing the redial list Menu is open Keypad is locked Alarm is set Indicates new voicemail messages received Phonebook is opened More text after *If you are on a call when you move out of range you will hear a warning beep and the line will hang up. Move closer to the base and the handset will automatically reconnect. CLOCK/ALARM PERSONAL SET Menu Map PHONEBOOK -- VIEW -- ADD NEW -- EDIT -- DELETE* -- DELETE ALL* -- DATE & TIME -- SET ALARM -- HANDSET TONE -- RING VOLUME -- RING MELODY -- KEY TONE -- HANDSET NAME -- AUTO ANSWER -- LANGUAGE ADVANCED SET -- ECO MODE -- ZERO EMIT -- AUTO PREFIX -- RECALL TIME -- CHANGE PIN -- REGISTER -- UNREGISTER -- RESET *Only available if a phonebook entry is stored. 16 Helpline Tel. 0344 844 3899 Ireland 01289 8333 1 t . 2 When there is a dial tone, dial the Making/Answering Calls Note: ●● A 3 second pause is inserted each time you press and hold (Pause) on the handset. L R Making calls L 3 When you finish talking, press L R phone number. or place the handset on the base unit or charger. e R h OR 2 t . 3 When you finish talking, press 1 Lift the handset and dial the phone number. ●● To correct a digit, press L R L L R e or place the handset on the base unit or charger. R p. When an external call is received, the phone rings and icon flashes on the display. 1 Lift the handset, press t when the unit rings. Answering calls 2 When you finish talking, press L R e or place the handset on the base unit or charger. L R Auto answer: You can answer calls simply by lifting the handset (page 26). Note: ●● When “BUSY” is displayed, another handset is in use. Wait and try again later. Adjusting the handset ringer volume LsR repeatedly to select the desired volume while ringing. Adjusting the receiver volume LsR repeatedly while talking. Pause (for PBX/long distance service users) A pause is sometimes required when making calls using a PBX or long distance service. When storing a calling card access number and/ or PIN in the phonebook, a pause is also needed. Example: If you need to dial the line access number “0” when making outside calls with a PBX: 1 Press and hold “P” (Pause) will be displayed. L R Useful features during a call Mute L h 2 Dial the phone number. L t. R f allows you to use the special features of your host PBX such as transferring an extension call, or accessing optional telephone services. L 1 m during a call. “MUTE ON” 2 To return to the call, press m . R R Recall L R Note: ●● To change the recall time, see page 27. Helpline Tel. 0344 844 3899 Ireland 01289 8333 17 Making/Answering Calls For call waiting or Call Waiting Caller ID service users To use call waiting or Call Waiting Caller ID, you must first subscribe with your service provider/telephone company. This feature allows you to receive calls while you are already talking on the phone. If you receive a call while on the phone, you will hear a call waiting tone. If you subscribe to both Caller ID and Call Waiting with Caller ID services, the 2nd caller’s information is displayed on the handset that is in use after you hear the call waiting tone. L handset that is to be called, press t. L R Receiving an internal call When an internal call is received, icon flashes and the handset number that is calling is displayed. 1 t to answer the call. L R Transferring calls Outside calls can be transferred or a conference call with an outside party can be made between 2 handsets. [. . . ] ●● Clean the charging contacts with a cloth moistened with alcohol. ●● Check that the mains power is connected properly and switched on. When the icon handset is fully charged, will appear steadily on the display. Handset does not ring ●● The handset ringer volume may be set to Off, see page 25. Noise interference on my phone or on other electrical equipment nearby ●● Place the phone at least one metre away from electrical appliances or any metal obstructions to avoid any risk of interference. No Caller Display ●● Check the subscription with the network operator, see page 23. ●● The caller may have withheld their number. [. . . ]