User manual PANASONIC KX-TGC220FX

[. . . ] Operating Instructions Digital Cordless Phone Model No. KX-TGC210FX KX-TGC212FX KX-TGC220FX Digital Cordless Answering System Model No. Model shown is KX-TGC210. Before initial use, see “Getting Started” on page 10. Thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. To use this unit in your country, first change the unit’s region setting to match your country (page 27). Change the unit’s display language as needed (page 14). [. . . ] *4 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select “Caller ID”. To turn this feature off, select “Manual”. (Caller ID subscribers only) To use this feature, set the date and time first (page 14). *5 KX-TGC212 *6 The ringer tone may continue to play for several seconds even if the caller has already hung up. You may either hear a dial tone or no one on the line when you answer the call. *7 The preset melodies in this product (“Ringtone 3” - “Ringtone 15”) are used with permission of © 2012 Copyrights Vision Inc. *8 If you do not want the unit to ring before the caller information is received, set to “Off”. (Caller ID subscribers only) You can only remove the first ring if the unit rings 2 times or more by default, which depends on your service provider/telephone company. *9 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any keys, including confirmation tones and error tones. *10 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature. *11 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. 24 TGC210_212_220FX_(en-en)_140714_ver. 110. pdf 24 2014/07/15 10:57:28 Programming *12 The default setting will be as follows if you select the following regional codes when changing the unit’s region setting (page 27): “Česká rep. ” = “100 msec. ” “Slovensko” = “100 msec. ” *13 To prevent other users from joining your conversations with outside callers, turn this feature on. *14 KX-TGC210 series: page 3 Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important: R Make sure the unit’s date and time setting is correct (page 14). 5 6 7 Set the desired time. a MOKN Enter a text memo (10 characters max. ). a MOKN MbN: Select the desired alarm tone. a MOKN R We recommend selecting a different ringer tone from the one used for outside calls. a MOKN MOKN a M N 8 9 Note: R Press M N to stop the alarm completely. [. . . ] Set the first ring to “Off” (page 22). R Incorrect time information from incoming Caller ID changes the time. Set the time adjustment to “Manual” (off) (page 22). R Edit the phonebook entry name to fit in 1 line of text (page 19). Time on the unit has shifted. [. . . ]