User manual PANASONIC KX-TGM450

[. . . ] KX-TGM420 KX-TGM450 Before initial use, see “Getting Started” on page 12. thank you for purchasing a Panasonic product. Please read these operating instructions before using the unit and save them for future reference. consulte “Guía Rápida Española” , página 73. [. . . ] R In the following table, < > indicates the default settings. R In the following table, indicates the reference page number. R Display menu order and sub-menu may vary depending on your model. Display menu tree and direct command code table Main menu: W “Phonebook” Operation Viewing the phonebook entry. main menu: Operation Viewing the caller list. Main menu: Sub-menu 1 Play new message Play all message Erase all message*1 Greeting “Answering device” Sub-menu 2 – – – Record greeting*1 Check greeting Pre-recorded*1 (Reset to pre-recorded greeting) Settings – – – – – – Code #323 #324 #325 #302 #303 #304 55 55 56 54 55 55 “Caller list” Code #213 52 Code #280 40 42 For assistance, please visit http://shop. Pdf 42 2016/04/26 10:55:39 Programming Sub-menu 1 New message alert*1 Sub-menu 2 Outgoing call – On/Off Outgoing call – Notification to Outgoing call – Remote code Base unit beep Settings Ring count*1 Settings On <Off> – Activate <Inactivate> On <Off> Toll saver 2-7 rings <4 rings> <3 min> 1 min Greeting only*2 <111> <On> Off <On> Off – – #339 #211 56 59 Code #338 56 Recording time*1 #305 59 Remote code*1 Screen call – Handset Screen call – Base unit*1 Answer on*1 Answer off*1 – – “Voicemail access” #306 #310 #G310 #327 #328 58 59 54 54 Main menu: Operation Code #330 61 Listening to voicemail messages. For assistance, please visit http://shop. Pdf 43 2016/04/26 10:55:39 Programming Main menu: Sub-menu 1 Ring adjustments “Settings” Sub-menu 2 Ringer volume (Incoming) – Handset Ringer volume (Incoming) – Base unit*1 Intercom ringer volume – Handset Intercom ringer volume – Base unit*1 Ringer tone (Incoming) – Handset*4, *5, *6 Ringer tone (Incoming) – Base unit*1, *4, *6 Intercom ringer tone – Handset*4, *5, *6 Intercom ringer tone – Base unit*1, *4, *6 Silent mode – Handset Settings Off–6 <6> Code #160 – Off–10 <1> #G160 – 1–6 <6> #175 – 1–10 <1> #G175 – <Ringer 1> #161 – <Ringer 1> #G161 – <Ringer 3> <Ringer 3> On/Off – On – <Off> Start/End – <11:00 PM/ 06:00 AM> Select group Group 1-9 #163 #G163 #238 – – 50 #237 50 #241 #G238 50 50 Silent mode – Base unit*1 On/Off – On – <Off> Start/End – <11:00 PM/ 06:00 AM> Select group Group 1-9 #G237 50 #G241 50 44 For assistance, please visit http://shop. Pdf 44 2016/04/26 10:55:39 Programming Sub-menu 1 Audio settings Sub-menu 2 Talking dial – Handset Talking dial – Base unit*1 Talking caller ID – Handset Talking caller ID – Base unit*1 Auto boost Boost speech Key tone – Handset Key tone – Base unit*1 Set date & time Date and time*1 Memo alarm – Alarm1-3 <Off> Once Daily Weekly <Caller ID auto> Manual Settings <Off> Low High <Off> Low High <On> Off On <Off> On <Off> On <Off> Off <Low> High Off <Low> High – Code #750 26 #G750 #162 #G162 #782 #783 #165 52 25 26 27 #G165 #101 #720 21 49 Time adjustment*1, *3 #226 – For assistance, please visit http://shop. Pdf 45 2016/04/26 10:55:39 Programming Sub-menu 1 Key detector setting*7 – 1: Add new device (for Detector1)*8 – 2: Add new device (for Detector2) – 3: Add new device (for Detector3) – 4: Add new device (for Detector4) Sub-menu 2 Change name*1 Settings Detector1 Detector2*9 Detector3*9 Detector4*9 Registration – Code #6561 #6562*9 #6563*9 #6564*9 #6571 #6572*9 #6573*9 #6574*9 Deregistration – #6581 #6582*9 #6583*9 #6584*9 Call block*1 Block a single number Block range of numbers Block unknown CID (CID: Caller ID) One ring for blocked call Memory dial Record greeting*1 Voicemail – – Save VM access#*1 (VM: Voicemail) VM tone detect*1 LCD contrast (Display contrast) Handset name Display name – – – On <Off> <On> Off Level 1–4 <2> – – – Block <Unblock> <Yes> No – – – #240 #173 #261 #302 #331 #332 #145 #104 #105 #217 37 38 38 38 41 54 60 60 – 50 50 – – – 46 For assistance, please visit http://shop. Pdf 46 2016/04/26 10:55:39 Programming Sub-menu 1 Message indicator Sub-menu 2 Handset – Incoming call Handset – New message Handset – New VM Handset – Missed call Handset – Alarm Base unit*1 – Incoming call Base unit*1 – New message Base unit*1 – New VM Base unit*1 – Missed call Caller ID edit (Caller ID number auto edit) Auto talk*10 Set tel line – Settings <On> Off <On> Off <On> Off On <Off> <On> Off <On> Off <On> Off <On> Off On <Off> <On> Off On <Off> <Tone> Pulse 80 ms 90 ms 100 ms 110 ms 160 ms 200 ms 250 ms 300 ms 400 ms 600 ms <700 ms> 900 ms A <B> <On> Off – – #214 53 #G278 Code #278 28 – Set dial mode*1 Set flash time*1, *11 #200 #120 #121 32 22 34 Set line mode*1, *12 Call sharing*1 Registration – Register handset Deregistration*2 #122 #194 #130 #131 – 34 50 51 For assistance, please visit http://shop. Pdf 47 2016/04/26 10:55:39 Programming Sub-menu 1 Headset type Sub-menu 2 – Settings <Headset> Neckloop with Mic Neckloop w/o Mic <English> Español <English> Español Code #786 30 Change language Display Announcement*1 #110 #112 21 21 Main menu: Operation “Customer support” Code #680 – Displaying customer support Web address. Main menu: Sub-menu 1 Search Battery check *1 “Key detector”*7 Sub-menu 2 – – Settings – – Code #655 – If you program these settings using one of the units, you do not need to program the same item using another unit. *2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code. *3 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. to turn this feature on , select “Caller ID auto”. To turn this feature off, select “Manual”. (Caller ID subscribers only) To use this feature, set the date and time first (page 21). *4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select one of the ringers (“Ringer 1” to “Ringer 5”). *5 The preset ringers in this product (“Ringer 6” - “Ringer 15”) are used with permission of © 2004 - 2013 Copyrights Vision Inc. [. . . ] The decision to repair, replace or refund will be made by the warrantor. Product or Part Name Telephone Parts One (1) Year Labor One (1) Year During the “Labor” warranty period there will be no charge for labor. During the “Parts” warranty period, there will be no charge for parts. This Limited Warranty excludes both parts and labor for non-rechargeable batteries, antennas, and cosmetic parts (cabinet). [. . . ]