User manual PANASONIC KX-TS2565UAB

[. . . ] 20 Multi-unit Operation Operating additional units . 23 Registering a handset to a base unit . 23 Setting all or selected handsets to ring . 26 Transferring calls between handsets/ Conference call . [. . . ] "RANGE ALARM": An alarm heard when you move out of range of a base unit during a conversation. "BATTERY LOW": An alarm heard when the batteries need to be charged. 4 Press {v} repeatedly to display "STANDBY MODE", then press {>}. 5 Press {v} repeatedly to select the desired setting, then press {>}. 6 Press {ih}. Note: L If you subscribe to a Caller ID service, the display will show the number of new calls even if "CLOCK" has been selected (page 13). L If "BS NO" is selected, the base unit number will be displayed. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. L If "HS NO" is selected, the handset number will be displayed. Example: 3 Press {v} repeatedly to display "TONE OPT", then press {>}. 4 Press {v} repeatedly to display the desired item, then press {>}. Selecting the talk mode display "TALK TIME": The length of the current call will be displayed. 5 Press {v} repeatedly to select "ON" or Helpline Tel. 01289 8333 17 Useful Telephone Settings "PHONE NO": The phone number will be displayed. 3 Press {v} repeatedly to display "CALL OPT", then press {>}. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 4 Press {v} repeatedly to display "CALL BAR", then press {>}. 5 Enter "0000" (default handset PIN). L If you changed PIN, enter it (page 19). 3 Press {v} repeatedly to display "DISPLAY OPT", then press {>}. 6 Press {v} repeatedly to select "ON" or "OFF", then press {>}. 4 Press {v} repeatedly to display "TALK MODE", then press {>}. 7 Press {ih}. Note: L While this feature is turned on, the following will be displayed. 5 Press {v} repeatedly to select the desired setting, then press {>}. 6 Press {ih}. Selecting the display language 10 display languages are available. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. Storing the direct call number Direct call allows you to dial a preset phone number simply by pressing {C}. No dialling is necessary. 3 Press {v} repeatedly to display "DISPLAY OPT", then press {>}. 4 Press {v} repeatedly to display "LANGUAGE", then press {>}. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING HS", then press {>}. 5 Press {v} repeatedly to select the desired language, then press {>}. 3 Press {v} repeatedly to display "CALL OPT", then press {>}. 6 Press {ih}. Note: L If you select a language you cannot read, reset the handset to its default settings (page 19). 4 Press {v} repeatedly to display "DIRECT NO", then press {>}. 5 Enter a phone number (24 digits max. ). L To correct a mistake, press {C}. Digits are cleared from the right. Call options Setting call bar This feature prohibits making outside calls. Important: L If you change the PIN, please write down your new PIN as the unit will not reveal the PIN to you. If you forget your PIN, consult your nearest Panasonic service centre. 1 Press {j}. 2 Press {v} repeatedly to display "SETTING BS", then press {>}. {2} {3} 3 4 5 6 7 Press {5}. Enter the current 4-digit base unit PIN. Enter the new 4-digit base unit PIN again. Press {ih}. Adjusting ringer volume 4 levels (high/medium/low/off) are available. {6} 1 Press {j}. 2 Press {v} repeatedly to display "SETTING BS", then press {>}. 3 Press {2} 2 times. 4 Select the desired setting by pressing {1} for low, {2} for medium, {3} for high or {0} for off. 5 Press {>}, then press {ih}. Setting time break/earth recall Select either time break recall or earth recall to suit your PBX or service provider. If you select earth recall, an earth relay must be installed. For further information, consult your nearest Panasonic service centre. *1 If you cancel a handset, the base unit will "forget" the handset registration. 1 Press {j}. 20 Helpline Tel. [. . . ] L Use the following wall template to position the screws before drilling. 8 cm Helpline Tel. 01289 8333 29 Useful Information Conditions of guarantee This guarantee is in addition to and does not in any way affect any statutory or other rights of consumer purchasers. If within the applicable guarantee period, the appliance proves to be defective by reason of faulty design, workmanship or materials, we undertake subject to the following conditions to have the defective appliance (or any part or parts there of) repaired or replaced free of charge. The appliance shall have been purchased and used solely within either the UK or ROI and in accordance with standard operating instructions and the technical and/or Safety Standards required in the UK. [. . . ]