Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual PANASONIC MC-CG712. We hope that this PANASONIC MC-CG712 user guide will be useful to you.
Lastmanuals help download the user guide PANASONIC MC-CG712.
Detailed instructions for use are in the User's Guide.
[. . . ] - This appliance is fitted with a thermal cut-out device which automatically turns off the appliance to prevent overheating of the motor. When this happens, disconnect the appliance from the socket outlet and check the dust compartment and filters as they may be full or clogged with fine dust. Check for any other obstructions in the hose or tube. [. . . ] You can remove the floor nozzle easily anytime by pressing the release pedal to use it. Indd
5
2012/01/11
10:24:16
Using the Appliance
Operating the appliance Parking and storing
Park position
1
Assemble the curved wand, telescopic wand, and floor nozzle together. - MC-CG712 Connect the curved wand and the floor nozzle to the telescopic wand by aligning the tab with the hole. Curved wand Telescopic wand Floor nozzle - MC-CG710 Connect the upper end of the telescopic wand to the curved wand by aligning the tab with the hole. Connect the other end of the telescopic wand to the floor nozzle by inserting and twisting one another. Curved wand Telescopic wand Floor nozzle To disassemble them, press the release button/pedal and pull them off from each other. Storage position
Perform the following before storing. 1 2
Turn off the appliance, and then remove the plug from the socket outlet. Press the cord rewind pedal to rewind the mains lead. Hold the plug to ensure the mains lead does not jump. 2 3
Pull out the mains lead and insert the plug into the socket outlet. Press the OFF/ON switch pedal to turn on the appliance. Press on the mark not the edge of the OFF/ON switch pedal. Adjust power by sliding the variable power control. Cord rewind pedal
4
Press on the mark, not the edge of the cord rewind pedal. Indd
6
2012/01/11
10:24:18
Replacing the dust bag
Replace the dust bag with the new one in the following cases: - When the dust bag is full For more details on the dust indicator, see page 3. [. . . ] - If a thermal cut-out device has activated, wait approximately 60 minutes until it has reset. - Rewind and pull out the mains lead repeatedly while pressing the cord rewind pedal without using excessive power. - Pull the mains lead out 2 m to 3 m and then press the cord rewind pedal to rewind the mains lead while holding the plug. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE PANASONIC MC-CG712
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual PANASONIC MC-CG712 will begin.
