User manual PANASONIC NE-2156-2

[. . . ] Please read these instructions completely before operating this oven and keep for future reference. When an outlet is not earthed, it is personal responsibility and obligation of the customer to have it replaced with a properly earthed outlet. vOLTAGE AND POWER WARNING The voltage used must be the same as specified on the microwave oven. Using a higher voltage than that which is specified is dangerous, and may result in a fire or other type of accident causing damage. [. . . ] 1 = 3 beeps 2 = short beeps for 60 seconds The loudest level and 3 beeps are preset at the factory. The tone will sound at its loudness level and the loudness level "3" followed by the word "bEEP" will appear. "PROG" will start to blink and 1st Stage Heating Indicator "1" (the length of beep tone "3 beeps") will be indicated. Note: Repeating to press the pad "0" will lower the loudness all the way to silent. That means that you have completed program. Example: To select short beeps for 60 seconds PAD INSTRUCTION Follow step 1-4 on page 9. Within three seconds after pressing Prog pad at step 4, press Number/Memory pad "0" once. This means that you have completed programming. Example: To read times of Number/Memory pad "3" at A side (6666 times used) PAD INSTRUCTION Open the door and leave it open. The times that the pressed Number/Memory pad has been used will appear. When you want to read the times of each pad at B side, press Shift (A/B) pad while the display is still showing the number of cycles in step 2. PAD INSTRUCTION Close the door while the display is still showing the number of cycles that each pad has been used. The times that the oven has been used in manual mode will appear. Example: To program cleaning Air Filter every 600 hours PAD INSTRUCTION Open the door and leave it open. the oven will turn on and "0" will appear. While pressing Start pad, close and open the door. Note: When "FILT" sign appears in Digital Display Window, remove Air FIlter and clean it with soapy water. press Stop/Reset pad to clear the display. To check the total number of hours used, x Open the door and leave it open. x Press Number/Memory pad "3" while pressing Start pad. X The total number of hours used and "H" will appear in Digital Display Window. If the oven has been used for 20 hours, Note: If the oven cuts out after short operation, check if Air Filter is clean before calling an engineer. [. . . ] hEATING FOODS FROM ROOM TEMPERATURE Food items such as canned entree , vegetables , etc. Will require significantly less heating time than those from refrigerated temperatures. For best results it is recommended that foods conventionally prepared be slightly undercooked when subsequently heated in this oven. REMEMBER that after the heating cycle has been completed, internal food temperatures continue to rise slightly in foods heated in this oven. [. . . ]