User manual PANASONIC NNE-486MM

[. . . ] Before operating this oven, please read these instructions carefully and keep for future reference. The appliance should be inspected for damage to the door seals and door seal areas and if these areas are damaged the appliance should not be operated until it has been repaired by a service technician trained by the manufacturer. Do not attempt to tamper with or make any adjustments or repairs to the door, control panel housing, safety interlock switches or any other part of the oven. Do not remove the outer panel from the oven which gives protection against exposure to microwave energy. [. . . ] Set the cooking time by pressing the appropriate buttons. Your oven can be programmed for up to 99 minutes 50 secs in Medium, Low, Simmer and Defrost power. High power can be programmed for 30 minutes. 800 Watts 240 Watts 560 Watts 440 Watts 80 Watts Press Start. 1 Press 2 Presses 3 Presses 4 Presses 5 Presses High Defrost Medium High Medium Low „„CAUTION!The oven will automatically work on MAX microwave power if a cooking time is entered without the power level previously being selected.  Standing Time can be programmed after microwave power and time setting. You can not change the cooking time during cooking. DO NOT attempt to use microwave only with any metal accessory in the oven.  lways check the food during defrosting by opening the door then restarting A the defrosting. It is not necessary to cover food during defrosting. To ensure an even result, stir, turn or separate several times during defrosting. For large joints and poultry turn halfway through defrosting and protect ends and tips with foil. 14 EN Multi-stage cooking This feature allows you to program up to 3 stages of cooking continuously. Example:  o set High power for 5 minutes and Low power for 10 minutes. The time will count down at the first stage in the display window. For 3 stage cooking, enter another cooking program before pressing start. During operation, pressing Stop/Cancel once will stop the operation. pressing Start will re-start the programmed operation. Pressing Stop/Cancel twice will stop and clear the programmed operation. Whilst not operating, pressing Stop/Cancel will clear the selected program. Auto programs cannot be used with multi-stage cooking. [. . . ] The roller ring and oven cavity floor should be cleaned regularly to avoid excessive noise. Simply wipe the bottom surface of the oven with mild detergent and hot water then dry with a clean cloth. The roller ring may be washed in mild soapy water. Cooking vapours collect during repeated use but in no way affects the bottom surface or roller ring wheels. [. . . ]