User manual PANASONIC NN-ST452W

[. . . ] ) No naked flame sources, such as lighted candles, should be placed on / above the set. English CAUTION This appliance is intended for use in environments which are relatively free of electromagnetic ¿elds. Using this appliance near sources of strong electromagnetic ¿elds or where electrical noise may overlap with the input signals could cause the picture and sound to wobble or cause interference such as noise to appear. To avoid the possibility of harm to this appliance, keep it away from sources of strong electromagnetic ¿elds. [. . . ] € Heated air comes out from the ventilation holes at the top of Display will be hot. Do not bring your hands or face, or objects which cannot withstand heat, close to this port, otherwise burns or deformation could result. Be sure to disconnect all cables before moving the Display. € If the Display is moved while some of the cables are still connected, the cables may become damaged, and ¿re or electric shock could result. Disconnect the power supply plug from the wall socket as a safety precaution before carrying out any cleaning. € Electric shocks can result if this is not done. clean the power cable regularly to prevent it becoming dusty. € If dust built up on the power cord plug, the resultant humidity can damage the insulation, which could result in ¿re. Pull the power cord plug out from the wall outlet and wipe the mains lead with a dry cloth. € Batteries must not be exposed to excessive heat such as sunshine, ¿re or the like. Cleaning and maintenance The front of the display panel has been specially treated. Batteries must not be exposed to excessive heat such as sunshine, ¿re or the like. 6 Connections AC cord connection English AC cord (accessory) Notes: • Insert the AC cord ¿rmly into place. € When disconnecting the AC cord, be absolutely sure to disconnect the AC cord plug at the socket outlet ¿rst. € The included AC cord is for use with this unit only. AUDIO OUT Connect to sound equipment DVI-D IN DVI-D Input Terminal AV IN HDMI HDMI Input Terminal 7 Connections DVI-D IN connection PC with DVI-D video out Installing the Ferrite core 1. English Stereo mini plug (M3) Less than Ferrite core 5 cm (supplied) DVI-video cable (Within 5 m) Pull back the tabs (in two places) Less than 5 cm 3. Open the Ferrite core Route the cable through and close Fix the Ferrite core with the cable tie DVI-D Input Connector Pin Layouts Pin No. Clock- Notes: • Additional equipment and cables shown are not supplied with this set. € Image deterioration may occur depending on the length or the quality of the cable. 8 Power On / Off Connecting the AC cord plug to the Display. English Connecting the plug to the Wall Outlet Notes: • Main plug types vary between countries. [. . . ] The content of hazardous substance with the exemption of the applications listed in the Annex No. Customer’s Record The model number and serial number of this product can be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identi¿cation in the event of theft or loss, and for Warranty Service purposes. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. [. . . ]