User manual PANASONIC NVGS140E

[. . . ] €As of November 2012” ● AC adaptor For Continental Europe: RFX0B43 For United Kingdom: (RFX0B44) RP-WF830 ● 2 Nickel-metal hydride rechargeable batteries (HHR-4AGE/2B) RP-WF830W ● 4 Nickel-metal hydride rechargeable batteries (HHR-4AGE/2B) Precautions Restriction of use For use only in the countries listed on page 6. The radio frequencies this unit uses (863 to 865 MHz) are not permitted in some countries. power sources See illustrations on page 3-A. Recharge the batteries before using the unit. [. . . ] This may deform or discolor the cabinet and may also cause malfunctioning. Service life of the batteries: If [OPR] indicator on the left housing (L) dims or fails to light even after recharging the batteries, they have come to the end of their serviceable life and need to be replaced. VQT4N46 For your reference: Dry cell batteries (R03/LR03, AAA) can be also used to power the headphones. Operation Preparation Turn on the audio-visual equipment the transmitter is connected to. Turn the volume on the sound source up as much as possible without causing distortion. Sound is more susceptible to noise interference when the source volume is set to low. If reception is still poor Connect the transmitter to the audio-visual equipment. The audio input plug a of the transmitter can be connected directly to the 3. 3 mm stereo standard plug adaptor (not supplied) c if the headphones jack is large (6. The radio waves from the transmitter may be being interfered with by other radio waves. You can change the transmitter channel to improve reception. Continued use may cause rashes or other allergic reactions. — Small abnormal sound may be heard from the AC adaptor. , keep the AC adaptor away from the radio. Specifications General Modulation system Stereo frequency modulation system Carrier frequency range 863 to 865 MHz Transmitting distance up to 100 m Installation This unit uses radio waves. The waves can be transmitted to a range of up to 100 meters. Note Under optimum conditions, the headphones can pick up clean signals from the transmitter to a maximum of 100 meters. Metal between the two units and the presence of other radio waves may cause interference to occur at a shorter distance. This interference can be cleared by moving closer to the transmitter, removing the obstructions, or changing the transmitter channel. You may occasionally experience interference due to dead spots in the area covered by the transmitter. This phenomenon occurs with any kind of radio signal and is not a malfunction. Dead spots can be moved by moving the transmitter and the headphones. [. . . ] — Do not place objects filled with liquids, such as vases, on this unit. To reduce the risk of fire, electric shock or product damage, ● Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. — Do not obstruct this unit’s ventilation openings with newspapers, tablecloths, curtains, and similar items. — Do not place sources of naked flames, such as lighted candles, on this unit. [. . . ]