User manual PANASONIC NVGS27E

[. . . ] KX-TG6711 KX-TG6712 KX-TG6713 KX-TG6721 series KX-TG6721 KX-TG6722 KX-TG6723 KX-TG6724 KX-TG6761*1 *1 Base unit Part No. KX-TG6711 KX-TG6711 KX-TG6711 KX-TG6721 KX-TG6721 KX-TG6721 KX-TG6721 KX-TG6721 Handset Part No. KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 KX-TGA672 Quantity 1 2 3 1 2 3 4 1 A DECT repeater (KX-TGA405EX) is supplied in this model. By installing this unit, you can extend the range of your phone system to include areas where reception was previously not available. [. . . ] KX-TG6761 Except KX-TG6761 KX-TG6711 series: page 3 *5 *6 *7 *8 *9 *10 *11 *12 *13 *14 Special programming Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important: R Set the date and time beforehand (page 16). 3 MbN: Select the desired alarm option. “Once” An alarm sounds once at the set time. “Daily” An alarm sounds daily at the set time. “Weekly” Alarm sounds weekly at the set time(s). 4 1 2 28 Proceed with the operation according to your selection in step 3. n Once: Enter the desired date and month. a #720 Select an alarm by pressing 1 to 3. 0844 844 3899 Ireland 01289 8333 TG67xxE(en)_0802_ver102. pdf 28 2012/08/02 16:27:47 Programming n Weekly: MbN: Select the desired day of the week and press . a Turning night mode on/off 5 6 7 Set the desired time. The default setting is “No”. 0844 844 3899 Ireland 01289 8333 29 TG67xxE(en)_0802_ver102. pdf 29 2012/08/02 16:27:47 Programming “Yes” without entering any handset name, “Handset 1” to “Handset 6” is displayed. 2 3 1 2 3 4 5 #104 Enter the desired name (max. a times M N 2 Enter the phone number (24 digits max. ). M N Viewing/editing/erasing bar call numbers 1 2 3 #217 MbN: Select the desired entry. R To exit, press M To edit a number: a Edit the phone number. a aM N To erase a number: a MbN: “Yes” a aM Incoming call barring (Caller ID subscribers only) This feature allows the unit to reject calls from specified phone numbers that you do not want to answer such as junk calls. When a call is received, the unit does not ring while the caller is being identified. If the phone number matches an entry in the call barred list, the unit sends out a busy tone to the caller, and then disconnects the call. Important: R When the unit receives a call from a number that is stored in the call barred list, the call is logged in the caller list after the call is (page 33) with disconnected. N Note: R When editing, press the desired dial key to to erase. add, Setting call restriction You can restrict selected handsets from dialling certain numbers. You can assign up to 6 phone numbers to be restricted, and select which handsets are to be restricted. [. . . ] If you have forgotten your remote access code, enter the remote access code setting to check your current code (page 37). Turn it on (page 38). I cannot operate the answering system remotely. Helpline Tel. 0844 844 3899 Ireland 01289 8333 47 TG67xxE(en)_0802_ver102. pdf 47 2012/08/02 16:27:48 Useful Information Liquid damage Problem Liquid or other form of moisture has entered the handset/base unit. Cause/solution R Disconnect the AC adaptor and telephone line cord from the base unit. [. . . ]