User manual PANASONIC PT-L300U

[. . . ] R LCD Projector POWER LIGHT INPUT VIDEO CMPNT COMPONENT KEYSTONE PC MENU ENTER NORMAL FREEZE MODE ASPECT PICTURE MEMORY USER Operating Instructions Model No. VOLUME MUTE SD SD MENU TIME LCD PROJECTOR PT-L300U PT-L200U Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ 0120-1 Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its back. You should note it in the space provided below and retain this booklet in case service is required. [. . . ] Access lamp $ Insert the SD memory card as shown in the illustration below. Insert the SD memory card with the label side facing upward and so that the cut-away corner is inserted first. Push the SD memory card in as far as it will go. NOTE: B If you try to force the SD memory card to go in the wrong way, it may damage the SD memory card and the card slot. % Close the slot cover. NOTE: B Always be sure to check that the access indicator is not flashing before removing the SD memory card. If the SD memory card is removed while the access indicator is flashing, the data stored on the SD memory card may become corrupted. % Push in the middle of the SD memory card. (The SD memory card will protrude slightly. ) & Remove the card. ' Close the slot cover. 42 About the SD menu The still image data and moving image data that is stored on SD memory cards can be played back using the SD menu. Displaying the SD menu Press the SD button to change the display to the SD CARD screen. PICTURE (page 44) This lets you play back still image data. PICTURE SLIDE SHOW VIDEO VIDEO (page 49) This lets you play back moving image data. SLIDE SHOW (page 45) This lets you play back still image data in a certain order. NOTE: B When the SD CARD screen is selected, the SD MENU button can be used to return to a previous screen (up to the SD menu shown above). 43 Advanced Operation B If the SD menu is not displayed when the SD button is pressed, --press the SD MENU button repeatedly until it is displayed or --the previous menu screen or image on an SD CARD screen may be displayed or played back. Playing back still images The PICTURE option lets you play back still image data. # Use the F and G buttons to select "PICTURE", and then press the ENTER button. % Use the F, G, I and H buttons to select the still image to be enlarged, and then press the ENTER button. PICTURE SLIDE SHOW VIDEO B If there is no still image data that can be played back, the following screen is not displayed. $ Use the F and G buttons to select the folder that contains the still image data that you would like to play back, and then press the ENTER button. 100-0001 (C) 1/11 (D) (C)File name of selected still image (D)Number of selected still image/Total number of still images B If there are 10 or more still images in a folder, use the F and G buttons to scroll through the pages. 100 1/3 (A) (B) (A)Number of selected folder (B)Folder number/Total number of folders B Up to a maximum of three still images that are saved in the folder can be displayed in a single row. If there are four or more folders, use the F and G buttons to scroll through the pages. <Button functions during still image playback> B Play back next image . . . H button B Play back previous image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I button B Rotate images . . . . . . . . . . . . . . . . . . . . . . . F and G buttons B Return to still image selection screen . . . . . . . . . . SD MENU button 44 Slide playback of still images "SLIDE SHOW" lets you play back still images in a certain order using one of three available playback methods. Use the F and G buttons to select an item, and then press the ENTER button. Use the I and H buttons to change the setting for the selected item. Use the F and G buttons to select "SLIDE SHOW", and then press the ENTER button. ALL FILE If you press the ENTER button, all still images that are stored on the SD memory card are played back in order. FOLDER If you use the I and H buttons to select the folder to be played back and then press the ENTER button, all still images in the selected folder are played back in order. USER If the user selects the desired still images, the still images that were selected by the user can be played back in order. [. . . ] rouge même si le L'affichage ne peut pas projecteur est en mode Plus de 2000 heures (Le témoin s'éteint automatiquement être effacé, quelle que d'attente. environ dix minutes après qu'on ait soit la touche sur laquelle on appuie. allumé l'appareil. ) Méthode de remplacement du bloc de lampe REMARQUE: B Si le temps d'utilisation de la lampe a dépassé 2000 heures (lorsque PUIS LAMPE a été mis sur "CHAUDE"), le projecteur passe en mode d'attente après environ dix minutes de fonctionnement. Dès lors, faire les étapes * à - à la page suivante dans les 10 minutes. [. . . ]