User manual PANASONIC PT-LC80

[. . . ] R LCD Projector Commercial Use Operating Instructions ENGLISH Model No. PT-LC80U PT-LC76U PT-LC56U POWER INPUT VIDEO RGB AUTO SETUP MENU ENTER FREEZE SHUTTER STD VOLUME INDEX WINDOW D. ZOOM PROJECTOR Before operating this product, please read the instructions carefully and save this manual for future use. TQBJ 0122-2 Dear Panasonic Customer: This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required. [. . . ] B If a normal (4:3) picture which was not originally intended for widescreen viewing is projected onto a wide screen, distortion may occur around the edges of the picture so that part of the picture is no longer visible. Such programs should be viewed in 4:3 mode to give proper consideration to the aims and intentions of the original program's creator. RESIZING This should normally be set to "ON". (This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 58 for details. ) ON The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected. For signals with lower resolutions, gaps in the pixels are automatically interpolated into the picture before it is projected. This may sometimes cause problems with the quality of the picture. OFF The picture signal is projected at its original resolution, with no pixel conversion. The projected picture will be smaller than normal, so adjust the zoom setting or move the projector forwards or backwards to adjust the picture size if necessary. If set to "OFF", some features, such as D. ZOOM (digital zoom), keystone distortion correction or INDEX WINDOW will not function. Changing the display language Use the F and G buttons on the projector or remote control unit to select a language, then press the ENTER button to accept the setting. LANGUAGE ENGLISH DEUTSCH FRANÇAIS ESPAÑOL ITALIANO SELECT ENTER ENGLISH Indicates the language which is currently set RETRN Option settings Use the F and G buttons on the projector or remote control unit to select an item, then press the I or H buttons to change the setting. OFF AUTO SETUP will not function when the input signal is changed. RGB/YPBPR RGB/YPB PR AUTO [ This sets the color which is projected onto the screen when no signal is being input to the projector. RGB [ FRONT/REAR FRONT/REAR FRONT [ YPB PR This should normally be set to AUTO. RGB or YPBPR is selected automatically depending on the synchronising signal status. When HDTV, 525p (480p), 525i (480i), 625i, 750p, and some VGA480 signals are being input, select "RGB" or "YPBPR" in accordance with the input signal. AUTO KEYSTN This should normally be set to ON. ON During automatic setup, the angle of tilt of the projector is detected and keystone distortion is corrected automatically. OFF Use this setting when you do not want automatic keystone correction to be carried out during automatic setup, such as when the screen itself is at an angle. OPTION1 OSD ON AUTO SIGNAL ON AUTO KEYSTN ON AUTO RGB IN ON RGB2 SELECT INPUT AUTO RGB/YPB PR VGA60/525P 525P SXGA MODE SXGA BLACKBOARD OFF SELECT ADJ RETRN OPTION2 BACK COLOR BLUE FRONT/REAR FRONT DESK/CEILING DESK FAN CONTROL STANDARD LAMP POWER HIGH LAMP RUNTIME 100H FUNC 1 INDEX CONTROL KEY ON AUTO POW. OFF DISABLE SELECT ADJ RETRN VGA60/525P VGA60/525P 525P [ REAR This setting should be changed in accordance with the projector setting-up method. Set to "FRONT" when using a normal reflective screen with the projector positioned in front of the screen, and set to "REAR" when using a translucent screen with the projector positioned behind the screen. AUTO RGB IN This should normally be set to ON. ON During automatic setup, the projector selects whichever one of the RGB1 IN or RGB2 IN connectors has a signal being input, and uses that signal for projection. (If a picture is being projected, the signal source is not automatically changed. ) OFF Use this setting when you do not want the signal source to be changed automatically during automatic setup. VGA60 When a VGA60 or 525p RGB signal is being input, select the signal in accordance with the input signal. DESK/CEILING DESK/CEILING DESK [ CEILING SXGA MODE SXGA [ SXGA+ This setting is only for an SXGA signal. SXGA+ When the projected image is contracted vertically, select this item. OSD ON The current input name is displayed in the top-right corner of the screen when the input signal is changed. OFF Use this setting when you do not want the current input name to be displayed. FAN CONTROL FAN CONTROL STANDARD [ RGB2 SELECT RGB2 SELECT INPUT [ BLACKBOARD (PT-LC80U only) Set to "ON" when PICTURE MODE is set to BLACK-BD. (Refer to page 35. ) HIGH Set FAN CONTROL to "HIGH", when using this projector at high elevations (above 1400 m) only. AUTO SIGNAL This should normally be set to ON. ON AUTO SETUP will be carried out automatically when the input signal is changed. OUTPUT This setting is used to select the function of the RGB2 IN/RGB1 OUT connector. LAMP POWER LAMP POWER HIGH [ BACK COLOR BACK COLOR BLUE [ LOW This setting changes the lamp brightness. When set to "LOW", the BLACK 42-ENGLISH ENGLISH-43 Adjustments and settings SXGA MODE This setting should be changed in accordance with the projector setting-up method. [. . . ] À propos de l'écran N'appliquer aucun produit volatil qui risque de décolorer l'écran, et veiller à ce que l'écran ne soit pas sale ou endommagé. A propos de la lampe Il est possible qu'il faille remplacer la lampe plus tôt en raison de facteurs variables comme les caractéristiques de la lampe, des conditions d'utilisation et un environnement d'installation particuliers, en particulier si elle est utilisée de façon continue pendant plus de 10 heures ou si l'alimentation est fréquemment mise en et hors circuit. 68-FRANÇAIS FRANÇAIS-69 Others Affichage à l'écran Témoin d'alarme de l'indicateur de la lampe ' Installer le couvercle du bloc de lampe, puis utiliser un tournevis Phillips pour resserrer fermement les vis de fixation du couvercle du bloc de lampe. REMARQUE: B S'assurer de bien installer le bloc de lampe et le couvercle du bloc de lampe. S'ils ne sont pas bien installés, cela és, peut déclencher le circuit de protection et le projecteur ne pourra pas être allumé. + Appuyer sur la touche d'entrée (ENTER) pour afficher le menu OPTION2, puis utiliser les touches F et G pour sélectionner DURÉE LAMPE. Plus de 1800 heures Plus de 2000 heures Affiché pendant 30 secondes. [. . . ]