User manual PANASONIC PT-D7500E

[. . . ] You should note it in the space provided below and retain this booklet in case service is required. Important Information Model number: PT-D7500E/PT-DW530E/PT-DX500E Serial number: WARNING: WARNING: THIS APPARATUS MUST BE EARTHED. To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture. Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779. Remove the plug from the mains socket when this unit is not in use for a prolonged period of time. [. . . ] Furthermore, if unstable signals are input, the system format can be selected manually. J HDMI terminal input signal z 480p, 576p signals z Other signals Select from Auto, RGB, and YCBCR. Select from Auto, RGB, and YPBPR 1 ) Press to select [SYSTEM SELECTOR]. 4 ) Press <ENTER> button. z Refer to "List of compatible signals" (Æpage 88) for available signals. z Malfunction may occur or other problems could be encountered with some equipment. Note J VIDEO/S-VIDEO terminal input signal To display pictures complying with the sRGB standard sRGB is the international color reproduction standard (IEC61966-2-1) established by IEC (International Electrotechnical Commission). To reproduce colors more faithfully in compliance with the sRGB standard, perform the following setting procedure. Select from AUTO, NTSC, NTSC4. 43, PAL, PAL-M, PAL-N, SECAM, and PAL60. z [AUTO] mode is selected by default. z When the projector is not working properly in [AUTO] mode, change the setting according to each SYSTEM SELECTOR type. z [AUTO] automatically selects from NTSC, NTSC4. 43, PAL, PAL-M, PAL-N, SECAM, and PAL60. Attention Note J RGB1/RGB2 terminal input signal z 480i, 576i, 576p signals z VGA60, 480p signals z Other signals Select from RGB and YCBCR. Select from RGB and YPBPR. z Refer to "List of compatible signals" (Æpage 88) for available signals. Note J DVI-D terminal input signal z 480p, 576p signals 1 ) Set [COLOR MATCHING], [COLOR COLLECTION] adjustment to [OFF]. z Refer to "COLOR MATCHING" (Æpage 54). z Refer to "COLOR COLLECTION" (Æpage 55). z Refer to "PICTURE menu" (Æpage 43). When wide signals are input *5 and [4:3] is selected with [SCREEN FORMAT], the aspect ratio is changed to 4:3. If [4:3] is not selected with [SCREEN FORMAT], the pictures are reduced so that they will be in the 4:3 screen without changing the input aspect ratio. ZOOM This adjusts the size of the projected pictures. 1 ) Press to select [ZOOM]. 2 ) Press <ENTER> button. z The [ZOOM] screen will be displayed. J H FIT The display will use the full width of the screen range selected with [SCREEN FORMAT]. When signals have a vertical aspect ratio that is larger than the screen aspect selected with [SCREEN FORMAT], the pictures will be displayed with their bottom areas cut off. 3 ) Press to select [VERTICAL]/ [HORIZONTAL], and press to adjust. J When [ASPECT] is set to [DEFAULT] J V FIT The display will use the full height of the screen range selected with [SCREEN FORMAT]. INTERNAL J HV FIT The pictures are displayed in the full screen range selected with [SCREEN FORMAT]. If the aspect ratios of the input signals and screen range differ, conversion to the screen aspect set with [SCREEN FORMAT] is performed and then the pictures are displayed. *4 : Standard signals are input signals with an aspect ratio of 4 : 3 or 5 : 4. *5 : Wide-screen signals are input signals with an aspect ratio of 16:10, 16 : 9, 15 : 9 or 15 : 10. Zoom area is the factory default setting of [SCREEN FORMAT] in [SCREEN SETTING]. Enlarges the size of the pictures using the whole of the display area selected with [SCREEN FORMAT]. FULL ENGLISH - 49 Settings 1 ) Press to select [MODE]. 2 ) Press to switch [MODE]. POSITION menu 3 ) Press to select [INTERLOCKED]. 4 ) Press to switch [INTERLOCKED]. OFF The [VERTICAL] and [HORIZONTAL] settings are used as the vertical and horizontal zoom ratios respectively. The zoom ratio is set to the [BOTH] setting. [. . . ] *2 : For details of video signals that can be projected using this projector, refer to "List of compatible signals" (Æpage 88). It may differ depending on each product. *4 : When using this projector at high elevations 1 400 - 2 700 m (4 593 - 8 858 ft) sea level, temperature will be 5 °C lower than this higher limit. z The part numbers of accessories and separately sold components are subject to change without notice. ENGLISH - 91 Appendix Specifications Dimensions <Unit : mm> 59. 5 (2 11/32") 270 (10 5/8") 332 (13 1/16") 92. 85 (3 21/32") 168 (6 5/8") 32 (1 1/8") About brand Trademark Acknowledgement z Microsoft® and its logos, Windows®, Windows® XP, Windows Vista®, Windows® 7, and Internet Explorer® are the registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. z Macintosh, Mac OS and Safari are the trademarks of Apple Inc. [. . . ]