User manual PANASONIC PT-L720E

[. . . ] · To affix other labels or stickers. · To insert the card into a device that does not accept an SD card (e. g. , device for multimedia cards). · To insert other matters than SD Memory Card in the SD Memory Card slot of the projector. · To use cracked or deformed card. [. . . ] If any image in a folder has undergone edit by Explorer etc. , for example, the re-display button will reflect the result in the thumbnail viewing frame. Automatic play: This function will project the images in the folder one after another at constant time intervals in turn from the first one to the last. Automatic play starts with the currently selected thumbnail image. During automatic play, the [Automatic play] button changes into a [Pause] button. When the [Pause] button is pressed, the next image remains selected for transmission. However, if the [Stop] button is pressed, the display sequence will be refreshed to the top image in the folder. During automatic play, too, other personal computers cannot connect to the projector because the projector is monopolized. In addition, the user may make settings of image display interval and loop times (display times) by going to [Option] [Others]. Timer: Every press on the [START] button will change the function in turn as: [START] [STOP] [RESET]. [START] activates the timer, [STOP] suspends the timer, and [RESET] clears the timer to "0". The user can use this function to check the elapsed time in presentation for reference. (See page 43) Setting Simple Connection When Simple Connection is used, the user may disable the screen saver. If the system hangs up due to any anomaly during Simple Connection, the user can press the [Restore] button to bring the network settings into the previous state. However, this cannot be guaranteed against all abnormal conditions. 45 Use of Web browser control Browsing software (Internet Explorer etc) can be used to access the projector and remote-control the projector from the personal computer, or to control the SD Memory Card inserted in the projector. Settings on the projector 1 Press the [MENU] button 2 Using the [ ] buttons, display the network settings screen. 3 Press the [ ] button. It is possible to change the settings using the [ · ] buttons. When alteration is complete, press the [ENTER] button. Web control ON: enables Web browser control. OFF: disables Web browser control. Web power supply ON: enables to turn on the lamp of the projector by Web browser control when the system is on standby. OFF: disables to turn on the lamp of the projector by Web browser control when the system is on standby. Use the POWER button of the projector or remote control to light the lamp. Web password Set a password within 16 alphanumeric characters. When the personal computer accesses the projector, the password will be queried. Then enter the password that was entered here. Using [ ], select the [Web] password, and press [ENTER], and a software keyboard will appear. 46 Use of Web browser control Settings on the personal computer 1 Right-click the [Internet Explorer] icon. This opens Properties. To], open [LAN 2 Go to [Connect the checkmark on settings], clear "All options", and click [OK]. Then the setting screen will be closed. Notes: · If Simple Connection is used, settings will be made automatically. [. . . ] Since this depends on the model, refer to the instruction manual supplied with your PC. ) The PC does not recognize the wireless card. · Is the wireless card inserted into the PC card slot of the PC until it reaches the end?· Had the driver been installed before the wireless card was inserted?· Are there sufficient IRQ (interrupting signal) numbers?(Refer to the online help of Windows. ) · If WEP is enabled, transfer operation takes a longer time because the image data needs to be converted. [. . . ]