User manual PANASONIC RX-FT600

[. . . ] [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. [. . . ] Do not take apart or short circuit the batteries. Do not leave the battery(ies) in an automobile exposed to direct sunlight for a long period of time with doors and windows closed. Mishandling of batteries can cause electrolyte leakage, which may cause a fire. Dispose of used batteries according to the manufacturer's instructions. Stop playback Pause play Skip tracks Press [8] (stop) during play. During RANDOM play, you cannot skip to tracks that have been played. Search through tracks Press and hold [­/2] or [6/+] during play or pause. During program play (Z see below), or random play (Z see below, "Play Mode function"), you can search only within the track. Play one selected track repeatedly on the disc. B OPR (operation) indicator The indicator lights up when the unit is turned on. C Clock or timer setting, play timer setting D Speakers These speakers do not have magnetic shielding. High position and metal position tapes can be used, but the unit will not be able to record or erase them correctly. The tuner presets all the stations it can receive into the channels in ascending order. Insert with the side to be recorded facing up and the exposed tape facing towards you. Record programmed tracks Program the tracks you want (Z page 4). Record on the other side of the tape Erase a recorded sound Changes to volume and sound quality do not affect recording. To record on the tape again, cover as shown. This system can also receive AM broadcasts allocated in 10 kHz steps. After a few seconds the display changes to a flashing display of the current minimum frequency. When the minimum frequency changes, release the button. To return to the original step, repeat the above steps. After the setting is changed, any previously preset frequency will be cleared. [. . . ] The play timer will start at the preset time, with the volume increasing gradually to the preset level. The timer comes on at the set time every day if the timer is on. If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated. Using the sleep timer This function enables you to turn off the unit automatically after the set time except in tape mode. [. . . ]