User manual PANASONIC SA24CTP

[. . . ] Before using your air-conditioner, please read this operating instructions carefully and keep it for future reference. Thank you for purchasing our Panasonic Room Air Conditioner. (Refer page 6) ON / OFF Dual Setting Timer To program the room air conditioner to turn itself on and to ensure you maximum comfort when sleeping. (Refer page 7) Sleep Mode Prevent the room from getting too hot or too cold while you are sleeping. [. . . ] Operation with 2°C lower than the standard temperature. POWER indicator (green) on the indoor unit will light up. Once the Automatic Operation is selected, the indoor temperature sensor operates automatically to select the desired operation mode with Cooling or Soft Dry. ⷠAfter the operation mode has been selected, the mode does not change. At the beginning of the automatic operation, Heating, Cooling or Soft Dry is automatically selected according to the indoor temperature. ⷠAfter the operation mode has been selected, the mode does not change. Press 4 to select:FAN ­ Low Fan Speed FAN ­ Medium Fan Speed FAN ­ High Fan Speed AUTO FAN ­ Automatic Fan Speed The speed of the indoor fan is adjusted automatically according to the operation. The indoor fan stops occasionally during cooling operation. Cooling / Soft Dry/ Heating (for Heat-Pump Model only) The airflow direction can be adjusted as desired by using the remote control. This is effective when you want to cool yourself directly, such as when coming out of the bath. The louver can be adjusted within a range between the horizontal and 25 degrees downward at Cooling and Soft Dry Operation, and between the horizontal and 45 degrees downward at Heating Operation. Cooling / Soft Dry The louver will automatically swing up and down to create the feeling of a refreshing breeze. G Use this air conditioner under the following conditions: Cooling Model Heating (for Heat-Pump Model only) When the discharge air temperature is low such as at starts of heating operation, the air blows at horizontal level. If the unit is not going to be used for an extended period of time, turn off the main power supply. if it is left at the ON position , approximately 2. 0 W of electricity will be used even if the indoor unit has been turned off with the remote control. ⷠIf operation is stopped, then restart immediately, the unit will resume operation only after 3 minutes. ⷠDo not use water hotter than 40°C or polishing fluid to clean the unit. To obtain a comfortable room temperature while sleeping:· Sleep mode indicator on the indoor unit will light up. ⷠTo cancel this operation, press once more. sleep Mode Operation Details · When the room temperature reaches the set temperature, the airflow volume will change to low automatically. When used together with the timer, the timer has a priority. [. . . ] After used over several seasons, the unit will become dirty and thus decreases the unit's performance. Depending on the operation conditions, a dirty unit may produce odour and dust may pollute dehumidification system. A sound like water flowing can be heard. ⷠIt seems that fog is coming out from the air conditioner. [. . . ]