User manual PANASONIC SA-AK25

[. . . ] only. P PC RQT6707-3P Table of contents Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. These operating instructions are applicable to the following systems. Unless otherwise indicated, illustrations in these operating instructions are of SC-AK510. System SC-AK610 SA-AK610 SB-AK610 SB-WAK610 SC-AK510 SC-AK410 SC-AK403 SA-AK510 SA-AK25 SA-AK403 SB-AK510 SB-AK410 SB-AK410 ­ ­ ­ Main unit Front speakers Subwoofer CAUTION! THIS PRODUCT UTILIZES A LASER. [. . . ] Always stop the changer before loading or changing CDs. You cannot change CDs while a disc is playing. CD display You can display the remaining play time of the current track. Remote control only Press [CD DISP] during play or pause. Every time you press the button: Elapsed play time Remaining play time Note When track number 25 or greater is playing, remaining play time display shows "­ ­:­ ­". AUTO OFF TIMER O SLEEP EEP CLOCK / CD DISP PL AY/ REC DIMMER AUTO OFF TIMER O SLEEP EEP CLOCK / CD DISP PL AY/ REC DIMMER DISC ABC DEF DISC ABC DEF 1 PROGRAM PROG AM GHI 2 JKL 3 MNO 1 2 JKL 3 MNO 4 5 TUV 6 WXYZ WXY 1 PLAY MODE PQRS AY 3 4 PROGRAM PROG AM GHI 4 PLAY MODE PQRS AY 5 TUV 6 WXYZ WXY 7 REPEAT REP AT DEL 8 0 CD 9 SPACE 7 REPEAT REP AT DEL 8 0 CD 9 SPACE 10 10 4 TAPE TUNER BAND ND CLEAR LEAR TAPE TUNER BAND ND CLEAR LEAR AUX AUX VOL AL BUM VOL CURSOR REW FF VOL ALBUM BUM VOL CURSOR REW FF INTRO MARKER TITLE SEARCH ENTER INTRO MARKER TITLE SEARCH ENTER S. WOOFER SHIFT S. SOUND EQ PRE T EQ MUT ING SHI S. SO UND RESET UTING S. WOOFER SHIFT S. SOUND EQ PRE T EQ MUT ING SHI S. SOUND RESET UTING Repeat play Remote control only Press [REPEAT] during play. " " is displayed. To cancel repeat play Press [REPEAT] to clear " Starting play from a specific track Remote control only 1 Press [DISC] and (within 10 seconds) [1]­[5] to select the disc. ". 2 Select the track with the numbered buttons. To select track 10 or over, press [X10] then the two digits. Note You cannot use this function with 1-RANDOM or A-RANDOM mode. To listen to specific CDs and tracks (CD Play Mode function) Remote control only Preparation: Press [:/J, CD] and then [L, CLEAR]. Program play You can program up to 24 tracks. 1 Press [PLAY MODE] to select the desired mode. Every time you press the button: ALL-DISC 1-SONG 1-RANDOM 1-DISC A-RANDOM Remote control only Preparation: Press [:/J, CD] and then [L, CLEAR]. 2 Press [DISC] and (within 10 seconds) [1]­[5] to select the disc. ALL-DISC: Plays all loaded discs in succession from the selected disc to the final disc . 1-SONG: Plays one selected track on the selected disc. 1-RANDOM: Plays one selected disc in random order. A-RANDOM: Plays all loaded discs in random order. (The original display is restored in about 2 seconds. ) 3 Select the tracks with the numbered buttons. To select track 10 or over, press [X10] then the two digits. Repeat steps 2 and 3 to program other tracks. Proceed to step 4 when you selected A-RANDOM in step 1. 4 Press [:/J, CD] to start play. To exit program mode Press [PROGRAM] in the stop mode. (You can replay your program by pressing [PROGRAM] then [:/J, CD]. ) You can do the following while "P" is displayed · To check program contents Press [g, REW/3] or [f, 4/FF]. 1-SONG: Plays one selected track on the selected disc. 1-ALBUM: Plays one selected album on the selected disc. (The original display is restored in about 2 seconds. ) ALL-DISC: 2 Press [DISC] and (within 10 seconds) [1]­[5] to select the disc. The CD starts. 3 When you selected "1-ALBUM" or "1-SONG" in step 1 Press [ALBUM ( or )] to select the album. Limitations on MP3/WMA play Play starts from the first track of the selected album. · This unit is not compatible with packet-write format. · When both MP3/WMA and CD-DA data is recorded on the disc over a number of sessions: · If the first session contains MP3/WMA recordings, the unit will play from the MP3/WMA made in that session till the session before the first CD-DA recordings. · If the first session contains CD-DA recordings, the unit will play only the recordings made in that session. The subsequent sessions will be ignored. You cannot use 1-Disc Random play, All-Disc Random play and search function. Some MP3/WMA may not be played due to the condition of the disc or recording. Recordings will not necessarily be played in the order you recorded them. 4 When you selected "1-SONG" in step 1 Press the numbered buttons to select the track in the current album. To select track 10 or over, press [X10] once then the two digits. To select track 100 or over, press [X10] twice then the three digits. When playback ends The current play mode will be retained in memory until it is changed even if the unit is turned off. [. . . ] The TV antenna wire is too close to the unit. Separate the antenna wire of the TV set from the unit. Using the cassette deck Poor quality sound. See below If the erasure prevention tabs have been removed, cover the holes with adhesive tape. % Playing discs The display is wrong or play won't start. [. . . ]