User manual PANASONIC SABT200

[. . . ] Operating Instructions Blu-ray Disc Home Theater Sound System Model No. SC-BT303 SC-BT300 SC-BT203 SC-BT200 The illustration shows the image of the unit SC-BT300 with "P" indicated on the packaging. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] The connection to the Internet may take time or the Internet may not be connected depending on the connection environment. ( It is required that you use a broadband connection. 40) Preparation Connect to a broadband network. ( 14) Testing of "IP Address/DNS Settings" Always test the connection when a LAN cable is connected. Setting the IP address In most cases, default settings can normally be used without making any changes. Set the IP address only when the router has no DHCP server functions or when the router's DHCP server function is disabled. 1 Press [BD/SD] to select "BD/DVD" or "SD". 3 Press [3, 4] to select "Network" and press [OK]. 4 Press [3, 4] to select "IP Address/DNS Settings" and press [OK]. 5 Press [3, 4] to select "Connection Test" and press [OK]. IP Address/DNS Settings Connection Test IP Address Auto Configuration ( DHCP ) IP Address Subnet Mask Default Gateway DNS Auto Configuration ( DHCP ) Primary DNS Secondary DNS Auto Detect Connection Speed Connection Speed Setting OK RETURN On 5 Press [3, 4] to select "IP Address Auto Configuration ( DHCP )" and press [2, 1] to select "Off". 6 Press [3, 4] to select "IP Address", "Subnet Mask" or "Default Gateway" and press [OK]. 7 Enter numbers with the numbered buttons and press [OK]. After checking the specifications for your broadband router, enter each number. If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable. Assign a different number from those of other devices for the "IP Address" and the same number for others. If a wrong number is entered, then press [CANCEL]. The numeric input range is between 0 and 255. After performing steps 1 to 4 ( left) On On 8 Press [2, 1] to select "Yes" and press [OK]. NOTE "Testing. . . ":The test is in progress. "Pass": The connection is completed. "Fail": Please check the connection and settings. Perform the "Connection Test" also when any change was made to the "IP Address/DNS Settings". Setting the DNS-IP In most cases, default settings can normally be used without making any changes. When setting an assigned DNS server from your Internet service provider, perform the following settings. NOTE Network IP Address/DNS Settings Proxy Server Settings Network Service MAC Address: xx-xx-xx-xx-xx-xx Follow the instructions given by your Internet service provider and enter the numbers. If the number is unknown, then check the number of other devices such as personal computers connected via a LAN cable and assign the same number. If a wrong number is entered, then press [CANCEL]. Primary DNS OK RETURN Please input Primary DNS and press [OK]. Press [CANCEL] to delete the selected character. To clear this setting, delete all characters and press [OK]. 192 . 1 . . 0-9 Number 8 Press [2, 1] to select "Yes" and press [OK]. The numeric input range is between 0 and 255. NOTE RQT9508 Advanced operations If the connection test fails, it may be necessary to set the MAC address of this unit at the router side. [. . . ] This warranty is extended to the original end user purchaser only. A purchase receipt or other proof of date of original purchase is required before warranty service is performed. THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES. [. . . ]