User manual PANASONIC SABT230

[. . . ] Easy Setting Guide The order of setting Blu-ray Disc Home Theater Sound System Model No. SC-BT230 1 1 Prepare the speakers See below 2 Place the speakers See below 3 Connect the cables See over 4 2 Turn on the main unit See over Easy setup See Easy setup screen Prepare the speakers Place the speakers RED Step 1 WHITE Label each speaker cable by attaching the numbered sticker at the position indicated in the illustration. [. . . ] Insert the wire fully, taking care not to insert beyond the wire insulation. : White : Blue line PURPLE GREEN RED Recommended White Front speakers (L, R) Surround speakers (LS, RS) 60 PUSH! Blue line 120 VQC7398 F1209RE0 3 Connect the cables Other connection For detailed information, refer to the operating instructions. Connect the cables by color or by the numbers indicated in the illustration to the appropriate terminals on the rear panel of the unit. PURPLE GREEN RED WHITE GRAY BLUE FM indoor antenna (included) Adhesive tape Broadband Network Connections (Optional) By connecting this unit to the network, you can use the BD-Live and VIERA CAST features. Main unit (10BASE-T/ 100BASE-TX) DIGITAL AUDIO IN L OPT OPTICAL 5 6 ENTER LAN 1 2 2 1 6 5 6 6 R 3 L SUBWOOFER CENTER FRONT 4 3 R 3 L SURROUND AV OUT LAN R Shielded LAN cable (not included) (ARC) VIDEO OUT AUX FM ANT (75) Main unit's speaker terminals (rear panel) HDMI cable (not included) (Recommended for highest quality picture) Video cable*1 (included) VIDEO IN AV IN *1 Make sure that this video connection is made to view photos/ videos from the iPod/ iPhone. Audio connection For best quality audio, use the HDMI cable (with an ARC compatible TV) or an optical digital audio cable. If your TV does not support the above, use the audio cable. TV L Audio cable (not included) AUDIO OUT R OPTICAL OUT Optical digital audio cable (not included) Modem (Broadband) · Provided by ISP Broadband router, etc. 4 1 AC IN Turn on the main unit Connect the AC power supply cord Connect the AC power supply cord to the main unit before connecting to the household AC outlet. 2 Turn on the TV 3 Turn on the main unit TV INPUT VOL 4 The Easy setup starts Turn on your TV and select the appropriate video input mode (e. g. , VIDEO 1, AV 1, HDMI, etc. ) to suit the connections to this unit. Press [ ] to turn on the main unit. The on screen display will guide you through the steps. *2 Main unit 1@. 2ABC 3DEF 4GHI 5JKL 6MNO 7PQRS 8TUV 9W XYZ CANCEL 0 _, BD/SD iPod VOL Easy setup Would you like to start easy setup?Voulez-vous amorcer le Réglage facile ? [. . . ] *2 If you want to restart the Easy setup: Refer to "STEP 6: Smart setup / Easy setup" in the operating instructions. To a household AC outlet (AC 120 V, 60 Hz) [. . . ]