User manual PANASONIC SC-BTT370

[. . . ] Owner's Manual Blu-ray DiscTM Home Theater Sound System Model No. SC-BTT770 SC-BTT370 SC-BTT270 SC-BTT273 The illustration shows the image of the unit SC-BTT770. Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read the instructions completely. [. . . ] Press [3, 4] to select "Select Folder" and press [OK]. Presetting stations manually Preparation Select a radio broadcast. 1 Press [RADIO] to select "FM". 2 Press [SEARCH6] or [SEARCH5] to select the frequency. To start automatic tuning, press and hold [SEARCH6], [SEARCH5] until the frequency starts scrolling. Tuning stops when a station is found. You cannot select folders that contain no compatible tracks. 1 2 While listening to the radio broadcast Press [OK]. While "P" is flashing on the display Press the number buttons to select a channel. To select a 1-digit number e. g. , 1: [1] [OK]. To select a 2-digit number e. g. , 12: [1] [2] A station previously stored is overwritten when another station is stored in the same channel preset. VQT3D27 29 Radio Playback Press [3, 4] to select the track and press [OK]. 1 2 Press [RADIO] to select "FM". Press [STATUS] to select the position to start the auto preset search. Listening/confirming the preset channels 1 2 Press [RADIO] to select "FM". Press the number buttons to select the channel. To select a 1-digit number e. g. , 1: [1] [OK]. To select a 2-digit number e. g. , 12: [1] [2]. Alternatively, press [W, X] or [3, 4]. Enjoying TV with unit's speakers TV Preparation Turn on your TV and select the appropriate audio input mode [AUX, ARC, D-IN] to suit the connections to this unit. ( 23) Surround sound effects You can enhance stereo sources with surround sound effect. Display on the main unit TUNED/STEREO: Displayed when receiving stereo broadcasting TUNED: Displayed when receiving monaural broadcasting or monaural sound is selected. 1 2 Press [SURROUND] several times to select the effect. While "MANUAL" is displayed on the unit's display Press [2, 1] and select the desired effect. Surround modes to enjoy TV audio or stereo sources from all speakers: DOLBY PRO LOGIC II MOVIE DOLBY PRO LOGIC II MUSIC SUPER SURROUND For more detailed information on this operation, please refer to the "Enjoying surround sound effects" section on page 24. If noise is excessive 1 Press and hold [jAUDIO] to activate to select the type. 2 Press [jAUDIO] to display "MONO". Press the button again in step 2 to cancel the mode. "AUTO STEREO" will be displayed on the main unit. Depending on the broadcast system, stereo or monaural will be selected. "MONO" is also canceled when you change the frequency. This setting can be preset for each broadcasting station. Sound modes You can adjust the mode depending on the source or situation. FM frequency step Main unit: The factory setting is set to 0. 2 MHz, it can be changed to receive broadcasts allocated in 0. 1 MHz. You may need to change this setting if the tuner seems to skip over the correct frequency for stations in your area. 1 Press [RADIO] to select "FM". After a few seconds the display changes to show the current lowest frequency. The lowest frequency changes and the step is changed. To return to the original settings, repeat steps 1 and 2. After changing the setting, previously preset frequencies will be cleared. Preset them again. 1 2 Press [SOUND] several times to select the mode. While the selected mode is displayed on the unit's display Press [2, 1] and select the desired setting. For more detailed information on this operation, please refer to the "Changing the sound modes" section on page 24. VQT3D27 30 Linked operations with the TV (VIERA Link "HDAVI TM ControlTM") What is VIERA Link "HDAVI Control"? VIERA LinkTM is a new name for EZ SyncTM. [. . . ] When shipping Lithium Ion batteries please visit our Web Site at www. panasonic. com/BatteryHandling as Panasonic is committed to providing the most up to date information. Include a letter detailing the complaint, a return address and provide a daytime phone number where you can be reached. A valid registered receipt is required under the Limited Warranty. IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD, THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES RECEIPT/PROOF OF PURCHASE INDICATING DATE OF PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE. [. . . ]