User manual PANASONIC SCBTT230EF

[. . . ] · Use cables with a white connector and red connector. STEP 2 Insert the wire fully, taking care not to insert beyond the wire insulation. 2 : White : Blue line L Back of the base Place the speakers RED WHITE Press into the groove. R Leave about 110 mm Base Tighten securely. Pull the cable straight along the line and slide into the groove. GREEN C STEP 3 Label each speaker cable by attaching the numbered sticker at the position indicated in the illustration. [. . . ] Be sure to match the number on each sticker with the circled number in the illustration. e. g. , Front speaker Lch Subwoofer Centre speaker GREEN Front speakers Rch Lch WHITE RED Surround speakers Rch GREY PURPLE BLUE SW LS GREY Lch BLUE PURPLE FRONT Lch 1 WHITE speaker STEP 4 Connect the speaker cables. Insert the wire fully, taking care not to insert beyond the wire insulation. : White : Blue line White Recommended Front speakers (L, R) RS Surround speakers (LS, RS) PUSH! FRONT/AVANT CENTER/CENTRE SURROUND/AMBIOPHONIE Blue line 60 Refer to the rear label of the speaker before connecting the corresponding cable. Verify the type of speaker with the label on the rear of the speaker. If your TV does not support the above, use the audio cable. Broadband router, etc. TV OPTICAL OUT Optical digital audio cable (not supplied) VIDEO IN L Video cable*1 (supplied only for Australia and New Zealand. ) *1 Make sure that the video cable connection is made to view photos/videos from the iPod/iPhone. Audio cable (not supplied) AUDIO OUT R Internet 4 1 Turn on the main unit Connect the AC mains lead Connect the AC mains lead to the main unit before connecting to the household mains socket. Main unit 2 Turn on the TV 3 Turn on the main unit 4 The Easy setup starts Turn on your TV and select the appropriate video input mode (e. g. , VIDEO 1, AV 1, HDMI, etc. ) to suit the connections to this unit. Press [ ] to turn on the main unit. The on screen display will guide you through the steps. Easy setup Would you like to start easy setup? AC mains lead (supplied) Installing batteries in the remote control To a household mains socket R6/LR6, AA Yes OK RETURN No Press [, ] to select [Yes] and press [OK]. [. . . ] Audio cable (not supplied) AUDIO OUT R Internet 4 1 Turn on the main unit Connect the AC mains lead Connect the AC mains lead to the main unit before connecting to the household mains socket. [. . . ]