User manual PANASONIC SCBTT400EP

[. . . ] Please keep this manual for future reference. Model number suffix "EB" denotes UK model. EB EP GN VQT3M06 Safety precautions Getting started Placement Place this unit on an even surface. To reduce the risk of fire, electric shock or product damage, jDo not install or place this unit in a bookcase, built-in cabinet or in another confined space. jDo not obstruct this unit's ventilation openings with newspapers, tablecloths, curtains, and similar items. jDo not expose this unit to direct sunlight, high temperatures, high humidity, and excessive vibration. WARNING Unit To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. [. . . ] Frame Colour Set the colour of feathering at the edge of screen. Signal Format The image is an illustration. When playing back a disc that has recorded titles with a 2 screen structure (Side by side) etc. which can be enjoyed in 3D, it will playback in accordance with the 3D settings on the TV, regardless of the settings mentioned to the table below. Screen displays, such as Playback menu, will not display correctly. Normal Soft Preparation Connect 3D compatible TV to an HDMI AV OUT terminal of this unit using a High Speed HDMI Cable, and select HDMI video input mode on the TV. ( 16, 17) Perform the necessary preparations for the TV. Method of playback is the same as normal disc playback. ( 27) Playback following the instructions displayed on the screen. 3D Picture Mode Manual Settings 3D settings Perform the following settings as necessary. 3D BD-Video Playback It is also possible to play back 3D discs in 2D (conventional video). ( 42) If 3D video cannot be played back in 3D, change the settings as required by the connected TV format. ( 43) Change the settings for 3D on the TV also when "Side by side" is selected. ( 43) Adjust the pop-up position for the playback menu or message screen etc. The tuner starts to preset all the stations it can receive into the channels in ascending order. [Except[Australia[and[New[Zealand] If the station you are listening to is transmitting RDS signals, programme service or programme type can be shown on the display. While listening to the radio broadcast Press [DISPLAY] to display the text data. "SET OK" is displayed when the stations are set, and the radio tunes to the last preset station. "ERROR" is displayed when automatic presetting is unsuccessful. Preset the stations manually. PS: Programme service PTY: Programme type OFF: Frequency display PTY displays NEWS AFFAIRS INFO SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP M ROCK M M. O. R. M* LIGHT M CLASSICS OTHER M WEATHER FINANCE CHILDREN SOCIAL A RELIGION PHONE IN TRAVEL LEISURE JAZZ COUNTRY NATIONAL OLDIES FOLK M DOCUMENT TEST ALARM Presetting stations manually Preparation Select a radio broadcast. 1 Press [RADIO] to select "FM". 2 Press [SEARCH6] or [SEARCH5] to select the frequency. To start automatic tuning, press and hold [SEARCH6], [SEARCH5] until the frequency starts scrolling. Tuning stops when a station is found. 1 2 While listening to the radio broadcast Press [OK]. While "P" is flashing on the display Press the number buttons to select a channel. To select a 1-digit number e. g. , 1: [1] [OK]. To select a 2-digit number e. g. , 12: [1] [2] A station previously stored is overwritten when another station is stored in the same channel preset. * M. O. R. M=Middle of the road music Display on the main unit TUNED/STEREO: Displayed when receiving stereo broadcasting TUNED: Displayed when receiving monaural broadcasting or monaural sound is selected. If noise is excessive Press [AUDIO] to display "MONO". Press the button again to cancel the mode. [. . . ] for the United Kingdom and Ireland Centre speaker [BTT775] [BTT770] SB-HC775 Type: 2 WAY 3 SPEAKER Bass-ref. Woofer: 3. 5 cm k 10 cm CONE TYPEk 2 Tweeter: 2. 5 cm SEMI-DOME TYPE Impedance: 3 Output sound pressure: 78 dB/W (1 m) Frequency range: 100 Hz to 30 kHz (j16 dB), 130 Hz to 25 kHz (j10 dB) Dimensions (WkHkD): 424 mmk59 mmk76 mm Mass: Approx. 1. 06 kg [BTT370] SB-HC370 Type: Full range: Impedance: Output sound pressure: Frequency range: Dimensions (WkHkD): Mass: [BTT270] SB-HC270 Type: Full range: Impedance: Output sound pressure: Frequency range: Dimensions (WkHkD): Mass: FM TUNER SECTION Frequency range: 87. 50 MHz to 108. 00 MHz (50 kHz step) Antenna terminal: 75 (unbalanced) 1 WAY 1 SPEAKER Bass-ref. 6. 5 cm CONE TYPE 3 78 dB/W (1 m) 95 Hz to 25 kHz (j16 dB), 120 Hz to 22 kHz (j10 dB) 145 mmk81 mmk70. 5 mm Approx. [. . . ]