User manual PANASONIC SC-HC29DBEB

[. . . ] Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. You may need them when maintaining or moving this unit. ) Model number suffix "EB" denotes UK model. EB RQTX1262-1B Caution for AC Mains Lead For your safety, please read the following text carefully. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362. [. . . ] 4 Set the finishing time by repeating steps 2 and 3. To activate the timer 5 Press [PLAY, F] repeatedly to set the desired play timer on. 6 Press [Í] to turn the unit off. Check the settings (When the unit is on or in standby mode) Cancel Press [CLOCK/TIMER] twice. (The setting is displayed. ) 1 Selecting a preset station Press [:] or [9] to select the channel. Alternatively, press the numeric buttons to select the channel. Press [PLAY, F] twice to clear the timer indicator from the display. Sound adjustment The following sound effects can be added to the audio output. Preset EQ Bass or Treble Surround Sound Press [PRESET EQ] repeatedly to select "HEAVY", "SOFT", "CLEAR", "VOCAL" or "FLAT". 1 Press [SOUND] repeatedly to select "BASS" or "TREBLE". 2 Press [2, 1] to adjust the level (-4 to +4). 1 Press [SOUND] repeatedly to select "SURROUND". 2 Press [2, 1] to select "ON SURROUND". To cancel surround sound, select "OFF SURROUND" in step 2. If interference in FM stereo reception increases, cancel the surround sound effect. Ensemble, station and service The number of stations that makes up one frequency differs between DAB and analogue radio. Analogue stations broadcast on different frequencies, even if it is the same company doing the broadcasting. With DAB, however, it is possible to broadcast a number of stations on the same frequency. In DAB terminology, an ensemble represents a group of stations on the same frequency. Preset function You can easily select your favourite stations by using the preset function ( 15). As shown in the diagram, an ensemble consists of a group of stations with primary services and secondary services. This means, for example, that commentary on sports events from different areas can all be broadcast at once. Initial DAB settings The first time "DAB" is selected, this unit will start the "DAB AUTO SCAN" and memorise the stations that are available in your region. Press [EXT-IN, RADIO] repeatedly to select "DAB". When a frequency is tuned, the ensemble corresponding to the frequency is displayed. The total number of available stations is displayed. The station first in alphanumeric order is selected. RQTX1262 14 "SCAN FAILED" is displayed when the Auto scan is unsuccessful. Adjust the antenna and restart the Auto scanning ( 15) or change the Auto scan frequency range ( 16). Checking the DAB signal reception quality With this function it is possible to check the signal reception quality of a selected frequency. If the reception quality is poor, try adjusting the antenna. Preparation Press [EXT-IN, RADIO] repeatedly to select "DAB". Listening to DAB stations On this unit, there are 2 ways of selecting the desired station. [. . . ] Alternatively, reformat the USB device and save these music albums prior to saving the other non-audio folders. "ERROR" Incorrect operation is performed. "F61" or "F76" There is a power supply problem. "AUTO OFF" The unit has been left unused for about 30 minutes and will shut down in a minute. [. . . ]