User manual PANASONIC SC-HC39DBEB

[. . . ] SC-HC39DBEB~RQT9941-B. book 1 ページ ２０１４年１月２１日　火曜日　午後２時５２分 Operating Instructions Compact Stereo System Model No. SC-HC39DB Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions (l 2, 3 and 18, 19) The installation work should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. [. . . ] (l 10) ∫ Manually tuning 1 frequency block Use this function to scan 1 frequency block after adjusting the position of the DAB antenna. Preparation Note down a frequency block that can be received in your region (e. g. , 12B 225. 648 MHz). 1 2 3 While “SCAN FAILED” is displayed. Press [PLAY MENU] repeatedly to select “MANUAL SCAN”. Press [3, 4] to select the frequency block that is receivable in your region and then press [OK]. 11 RQT9941 SC-HC39DBEB~RQT9941-B. book 12 ページ ２０１４年１月２１日　火曜日　午後２時５２分 Listening to FM radio You can preset up to 30 channels. Preparation ≥ Make sure that the antenna is connected. ≥ Press [RADIO/AUX] repeatedly to select “FM”. ∫ Manual tuning and presetting Select a radio broadcast. 1 2 3 Press [PLAY MENU] repeatedly to select “TUNEMODE”. Press [3, 4] to select “MANUAL” and then press [OK]. Press [:/6] or [5/9] to tune to the required station. ≥ To start automatic tuning, press and hold [:/6] or [5/9] until the frequency starts scrolling. Tuning stops when a station is found. ≥ A station previously stored is overwritten when another station is stored in the same channel preset. Presetting stations automatically To preset the channel 4 While listening to the radio broadcast, press [OK]. 5 Press [3, 4] to select the channel and then press [OK]. 1 2 Press [PLAY MENU] to select “A. PRESET”. Press [3, 4] to select “LOWEST” or “CURRENT” and then press [OK]. LOWEST: To begin auto preset with the lowest frequency (FM 87. 50). CURRENT: To begin auto preset with the current frequency. * {. The tuner starts to preset all the stations it can receive into the channels in ascending order. ∫ To improve FM sound quality 1 2 While receiving FM broadcasts, press [PLAY MENU] repeatedly to select “FM MODE”. Press [3, 4] to select “MONO” and then press [OK]. ≥ This setting can be preset and memorised. To do so, continue to step 4 of “Manual tuning and presetting”. ≥ Select “STEREO” in step 2 to return to stereo broadcasts. ≥ “MONO” is cancelled if the frequency is changed. * To change the frequency, refer to “Manual tuning and presetting”. ∫ To display the current FM signal status While receiving FM signal, press [DISPLAY]. “FM ST”: “FM”: The FM signal is tuned and in stereo. There is no tuned signal or the FM signal is in monaural. “FM MONO”: “MONO” is selected in step 2 of “To improve FM sound quality” (l above). Listening to a preset channel 1 2 3 Press [PLAY MENU] repeatedly to select “TUNEMODE”. Press [3, 4] to select “PRESET” and then press [OK]. Press [:/6] or [5/9] to select the channel. ≥ “STEREO” is displayed when this unit tunes to a stereo broadcast. 12 RQT9941 SC-HC39DBEB~RQT9941-B. book 13 ページ ２０１４年１月２１日　火曜日　午後２時５２分 Sound adjustment The following sound effects can be added to the audio output. Play timer You can set the timer so this unit turns on at a certain time every day. [. . . ] At least 30 mm ‰7. 5 mm to ‰9. 4 mm Fix to the wall Safety holder Safety holder fixing screw (not supplied) ‰4 mm Wall mount bracket 8 Attach the fall prevention cord (not supplied) to the wall. ≥ Make sure that the slack of the cord is minimal. Screw eye (not supplied) Wall Cord (not supplied) 19 RQT9941 SC-HC39DBEB~RQT9941-B. book 20 ページ ２０１４年１月２１日　火曜日　午後２時５２分 Specifications ∫ GENERAL Power consumption 26 W Power consumption in standby mode*1, 2 Approx. 0. 2 W (When “BLUETOOTH STANDBY” is “ON”)*2 Approx. 0. 3 W Power supply AC 220 V to 240 V, 50 Hz Dimensions (WkHkD) 500 mmk205 mmk92 mm Mass Approx. [. . . ]