User manual PANASONIC SC-HC49EG

[. . . ] SC-HC49 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions (l 2 and 18, 19) The installation work should be done by a qualified installation specialist. Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. [. . . ] To return all settings to the factory defaults When the following situations occur, reset the memory: 1 2 3 Press [CD/RADIO] to select “CD”. While pressing and holding [SELECTOR] on the unit, press and hold [CD/RADIO] on the remote control until the unit’s display shows “REMOTE 2”. Press and hold [OK] and [CD/RADIO] on the remote control for at least 4 seconds. (Wait for at least 3 minutes before proceeding to step 2. ) 2 While pressing and holding down [Í/I] on the unit, reconnect the AC mains lead. ‰ To change the mode back to “REMOTE 1”, press [CD/RADIO] to select “CD” and then repeat the step 2 and 3 but replace [CD/RADIO] with [ ]. ‰ Keep holding down [Í/I] until “---------” appears on the display. Software update Occasionally, Panasonic may release updated software for this unit that may add or improve the way a feature operates. These updates are available free of charge. For more details, refer to the following website. ) ≥ All the settings are returned to the factory defaults. You will need to reset the memory items. general Humming heard during playback. ‰ If an AC mains lead or fluorescent lights are near the cords, then keep other appliances and cords away from the cables. ˆ Checking the software version The version of the installed software is displayed. ‰ One of the unit’s safety devices may have been activated. Reset the unit as follows: 1 Press [Í/I] on the unit to switch the unit to standby. ‰ If the unit does not switch to standby, press [Í/I] on the unit for approximately 10 seconds. the unit is forcibly switched to standby. Alternatively, disconnect the AC mains lead, wait for at least 3 minutes, then reconnect it. 2 Press [Í/I] on the unit to switch it on. If the unit still cannot be operated, consult the dealer. [. . . ] ‰ Connect the antenna and the AC mains lead to the unit before hanging the unit onto the wall. (l 5) ≥ After hanging the unit, release your hands carefully to confirm the unit sits securely on the wall mount brackets. The position to attach the wall mount brackets 13 mm 204 mm Space required Wall 300 mm 142 mm 75 mm 154 mm 142 mm 7 100 mm 500 mm 100 mm Drive the safety holder fixing screw (not supplied) to secure the safety holder onto the wall. ‰ Refer to step 5 for requirements before screwing. [. . . ]