User manual PANASONIC SC-HTB480EB

[. . . ] SC-HTB480EB_RQT9917-B. book 1 ページ ２０１４年２月２７日　木曜日　午前９時４６分 Operating Instructions Home Theater Audio System Model No. SC-HTB480 Thank you for purchasing this product. Please read these instructions carefully before using this product, and save this manual for future use. Included Installation Instructions The installation work should be done by a qualified installation specialist. ( 13 to 18) Before commencing work, carefully read these installation instructions and the operating instructions to ensure that installation is performed correctly. [. . . ] Enhance the dialog in low volume condition. ON OFF Select “OFF” to cancel this effect if the dialog does not sound natural in low volume condition. Audio format You can view the current audio format. Press and hold [SOUND] for more than 4 sec. DOLBY DIGITAL DTS PCM MULTI Dolby Digital is the audio source. Linear pulse-code modulation is the audio source. 2 channel pulse-code modulation is the audio source. 3D CLR DIALOG PCM DUAL AUDIO AGC LOW VOL MODE ≥ The default setting is underlined. Changed settings will be kept until it is changed again, unless otherwise indicated. RQT9917 23 Operations SC-HTB480EB_RQT9917-B. book 24 ページ ２０１４年２月２７日　木曜日　午前９時４６分 Setup menu Press [SETUP] repeatedly to select the setup item. Press [3, 4] repeatedly to select the desired setting and then press [OK]. Dims the display after 5 seconds of inactivity. ON OFF The main unit automatically is turned off if there is no audio input and when you do not use it for approx. ON OFF Sets the volume limit to 50 when you turn on the main unit although the volume is set to above 50 before it is turned off. ON OFF This function allows you to connect a paired Bluetooth® device when the main unit is in standby mode. ON OFF The main unit will be turned on automatically when you connect a paired Bluetooth® device. LINK MODE DIMMER Change the Bluetooth® connection link mode to suit the connection type. Make sure to disconnect the current connected device (“BLUETOOTH READY” is indicated on the display). ON OFF Select “OFF” when your HDAVI Control device does not work correctly with this system. Turn off all connected devices and then turn them on again after changing the setting. AUTO POWER DOWN VIERA LINK VOL LIMITATION ≥ The default setting is underlined. Changed settings will be kept until it is changed again, unless otherwise indicated. BLUETOOTH STANDBY 24 RQT9917 SC-HTB480EB_RQT9917-B. book 25 ページ ２０１４年２月２７日　木曜日　午前９時４６分 Linked operations with the TV (VIERA Link “HDAVI ControlTM”) What is VIERA Link “HDAVI Control”? VIERA Link “HDAVI Control” is a convenient function that offers linked operations of this system, and a Panasonic TV (VIERA) under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. What you can do with VIERA Link “HDAVI Control” To make sure that the audio is output from this system, turn the main unit on by using the TV’s remote control and selecting home cinema from the speaker menu of VIERA Link menu. The availability and function of the settings may vary depending on the TV. Refer to the operating instructions for the TV for details. Preparation 1 Confirm that the HDMI connection has been made. ( 9, 10) 2 Set the “HDAVI Control” operations on the connected equipment (e. g. , TV). [. . . ] ≥ Do not use this system near equipment or in an environment that is sensitive to radio frequency interference (example: airports, hospitals, laboratories, etc. ). RQT9917 29 Reference SC-HTB480EB_RQT9917-B. book 30 ページ ２０１４年２月２７日　木曜日　午前９時４６分 Specifications AMPLIFIER SECTION RMS output power: Dolby Digital Mode Front ch (L, R ch) 60 W per channel (6 ≠), 1 kHz, 10 % THD Subwoofer ch 130 W per channel (8 ≠), 100 Hz, 10 % THD Total RMS Dolby Digital mode power 250 W GENERAL Power consumption Main unit 34 W Active subwoofer 23 W In standby condition Main unit§1 When “BLUETOOTH STANDBY” is “OFF” Approx. 0. 48 W When “BLUETOOTH STANDBY” is “ON” Approx. 3 W Active subwoofer Power switch off Approx. 0. 25 W The wireless link is not activated Approx. [. . . ]