User manual PANASONIC SCHTB570EB

[. . . ] You may need them when maintaining or moving this unit. ) Model number suffix “EB” denotes UK model. EB RQT9825-1B 2013/02/22 SC-HTB65EB_RQT9825-B. book 2 ページ ２０１３年２月２１日　木曜日　午前１０時６分 Safety precautions WARNING Unit ≥ To reduce the risk of fire, electric shock or product damage, jDo not expose this unit to rain, moisture, dripping or splashing. jDo not place objects filled with liquids, such as vases, on this unit. Refer servicing to qualified service personnel. CAUTION Unit ≥ Do not place sources of naked flames, such as lighted candles, on this unit. ≥ This unit may receive radio interference caused by mobile telephones during use. [. . . ] Do not connect the AC mains lead until all other connections are completed. Connection with the TV Precautions TV OPTICAL OUT OPTICAL DIGITAL AUDIO IN (TV) A A Optical digital audio cable ≥ When you use the optical digital audio cable, insert the tip correctly into the terminal. Connection with other device AUDIO OUT L BD/DVD AUDIO IN e. g. , Set top box R B Refer to the operating instructions of the respective devices for the optimal connection. TV B Audio cable RQT9825 15 Getting started SC-HTB65EB_RQT9825-B. book 16 ページ ２０１３年２月２１日　木曜日　午前１０時６分 AC mains lead connection ≥ Connect only after all other connections are completed. A To a household mains socket B AC mains lead (supplied)  AC IN  ≥This system consumes a small amount of AC power ( 24) even when it is turned off. In the interest of power conservation, if you will not be using this system for a long time, unplug it from the household mains socket. BE SURE TO READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 3 BEFORE CONNECTION. Saving energy The main unit is designed to conserve its power consumption and save energy. ≥ The main unit will automatically switch to standby mode when no signal is input and no operation is performed for approx. Refer to page 20, “Auto standby function” to turn this function off. 16 RQT9825 SC-HTB65EB_RQT9825-B. book 17 ページ ２０１３年２月２１日　木曜日　午前１０時６分 Using this system Operations Preparation ≥ Turn on the TV and/or connected device. Adjust the volume and sound effect level. ∫ To adjust the volume of this system Press [i VOL j]. ≥ Volume range: 0 to 100* ∫ To adjust the dialog effect level This setting will change the level of the Clearmode dialog effect. ( 18) 1 Press [i DIALOG LEVEL j] to display the current level. 2 While the level is displayed: Press [i DIALOG LEVEL j] to adjust the level. Indication Effect level 4 Highest Press [Í] to turn on the main unit. ( right) ≥ To turn off the 3D surround and the Clear-mode dialog effects, refer to “Using the Dolby Virtual Speaker effect”. ( 19) 18 RQT9825 SC-HTB65EB_RQT9825-B. book 19 ページ ２０１３年２月２１日　木曜日　午前１０時６分 Advanced operations Audio format indicator To display the current audio format. Auto gain control With this function, you can prevent sudden loud sounds. The output will be reduced automatically when the input exceeds a certain level. Press and hold [SOUND] for more than 4 sec. ≥ The current audio format is indicated for 5 sec. “STADIUM” indicator blinks: Dolby Digital is the audio format. “MUSIC” indicator blinks: DTS is the audio format. Press and hold [BD/DVD] on the remote control for more than 4 sec. “STANDARD” indicator blinks: Auto gain control is on. “STEREO” indicator blinks: Auto gain control is off. (Factory preset) “CINEMA” indicator blinks: PCM is the audio format. While the setting is displayed, press [BD/DVD] on the remote control to change the setting. ≥ The setting changes each time [BD/DVD] is pressed. ≥ The indicator for the selected setting blinks for 20 sec and then exits the setting mode. ≥ The setting is maintained until it is changed again. Audio format is not indicated when “BD/DVD“ is selected as the source. Changing the dual audio Change the dual audio from main to secondary. ≥ This setting will only work if the audio output setting on the connected TV or player, etc. is set to “Bitstream” and dual audio is available in the audio source. Using the Dolby Virtual Speaker effect Depending on your preference, It is possible to turn off the 3D surround effect and the clearmode dialog effect. Press and hold [MUTE] for more than 4 sec. “STANDARD” indicator blinks (A): Main (Factory preset) “STEREO” indicator blinks (B): Secondary (SAP: Secondary Audio Program) When A and B both blink: Main and secondary “STANDARD” indicator blinks: 3D surround effect and clear-mode dialog effect is on. [. . . ] ≥ When the audio format is PCM*3 ( 19) P The indicator blinks for 20 sec. ≥ When 3D surround effect and clear-mode dialog effect are off ( 19) ≥ When the dual audio setting is Secondary (SAP: Secondary Audio Program) ( 19) ≥ When the auto gain control is off ( 19) The indicators blink for 20 sec. ≥ When the dual audio setting is Main and Secondary ( 19) The indicators blink for 10 sec. ≥ When the remote control code is changed ( 20) The indicators blink once. [. . . ]